- Navigation
Results 21 to 30 of 83
Thread: Winter Build gt47-88 383 lt1
-
12-04-2012, 07:14 PM #21LTXTech Sponsor
- Status
- Offline
- Join Date
- Nov 2010
- Vehicle
- 1992 convertible camaro
- Location
- Florida, United States
- Posts
- 631
YES !
popo, Yes thats a QUICK way to cool down a FMIC. but a waste for $40+ to fill a nitrous bottle just to spray down your fmic.
That $ would be better spend on a water / meth injection kit to help cool the intake charge. MOST people just use washer fluid as it contains alcohol also.
OP, you could always go air to water with a ice tank in the back also. As for Tranny I would deff. go th400 over a glide if you plan to do any kinda street driving / cruising.
Even then Im looking for a used gearvenders OD unit myself just to pick up some extra gear for long trips if ever needed.'92 vert with 383 LT1 | 78mm turbonetics turbo, Tial 50mm BOV , Tial 44mm waste gate | Ported heads | Intake Drilled for MSD Pro Billet Distrib|Callies crank & rods | JE Pistons | T56 | spohon suspention.
'97 Camaro LT1 /T56 | Longtubes | O/R Y pipe | Magnaflow cat back | K&N CAI | CSR EWP | Dynoed 292rwhp /321 rwtq Best et. 13.1@107 w/ 2.07 Sixty ft.
~Custom Made Billet Emblems | Thermal ,Ceramic & Powder Coatings ,etc.. Just PM me~
-
12-05-2012, 02:26 PM #22
Lurker
- Status
- Offline
- Join Date
- Nov 2012
- Posts
- 63
-
12-05-2012, 05:37 PM #23LTXTech Sponsor
- Status
- Offline
- Join Date
- Nov 2010
- Vehicle
- 1992 convertible camaro
- Location
- Florida, United States
- Posts
- 631
Ya a GV isnt in my budget right now either. Id like to put a T56 in my car but It would cost me just as much as a GV unit to "BUILT" a good t56.
So I'll stick with my FTI Th400
Yes all the ebay fmic's are basically the same. Find the size you want and then the best deal on price and shipping.'92 vert with 383 LT1 | 78mm turbonetics turbo, Tial 50mm BOV , Tial 44mm waste gate | Ported heads | Intake Drilled for MSD Pro Billet Distrib|Callies crank & rods | JE Pistons | T56 | spohon suspention.
'97 Camaro LT1 /T56 | Longtubes | O/R Y pipe | Magnaflow cat back | K&N CAI | CSR EWP | Dynoed 292rwhp /321 rwtq Best et. 13.1@107 w/ 2.07 Sixty ft.
~Custom Made Billet Emblems | Thermal ,Ceramic & Powder Coatings ,etc.. Just PM me~
-
12-05-2012, 06:35 PM #24
-
12-05-2012, 07:18 PM #25
Lurker
- Status
- Offline
- Join Date
- Nov 2012
- Posts
- 63
-
12-05-2012, 08:26 PM #26
-
12-05-2012, 09:34 PM #27
Lurker
- Status
- Offline
- Join Date
- Nov 2012
- Posts
- 63
-
12-05-2012, 10:38 PM #28
-
12-06-2012, 05:55 PM #29
this winter im rerouting my cold pipes to go over the radiator instead of going under. i also cut out both radiator supports and put them in so its a bolt in round tube ( so i can unbolt the radiator supports to pull the engine right out of the front). im also repowdercoating the whole engine and ceramic coating the exhaust and wraping the exhaust too. im painting the engine bay why everything is out. ( i figured i could paint the engine bay black with clearcoat for 30 or 40 bucks so i figured i better do it.) so all of these pics are from last year in a couple months it will look totally diffrent.
new new pics 023.jpgnew new pics 018.jpgnew new pics 024.jpgnew new pics 021.jpgnew new pics 026.jpgnew new pics 025.jpg
-
12-06-2012, 06:07 PM #30Xtreme Member
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Brian DeLuca
- Vehicle
- 1997 Trans Am WS6
- Location
- Piscataway, NJ
- Posts
- 1,297
Yea that all looks pretty street car.
97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
17 Corvette Z06 - 11.05 @ 125
17 GMC Sierra Denali Dmax

Reply With Quote

Bookmarks