Methanol Injection Setup

[shownomercy]

Devils Own stuff, that has never seen any type of fluid. Installed on car and never used.

2.5 gal sumped tank, pump, line, and nozzle with adapter


Its the high pressure, larger fitting size pump from devilsown


Believe its a 14gph nozzle


Take it all for $150

[Camaro96]

Interested can you provide more information please

Sent from my VS996 using Tapatalk

[shownomercy]

Interested can you provide more information please

Sent from my VS996 using Tapatalk

Sure, what info for you want?

[Camaro96]

Is there anything missing in the kit that I'll need to buy two finish setting it up LT1? Do you have the instruction booklet for installation question

Sent from my VS996 using Tapatalk

[shownomercy]

Is there anything missing in the kit that I'll need to buy two finish setting it up LT1? Do you have the instruction booklet for installation question

Sent from my VS996 using Tapatalk

This is not a kit.

This is what I pieced together to suit what I needed. In my case my boost controller would kick the pump on at a certain manifold pressure.

[Camaro96]

This is not a kit.

This is what I pieced together to suit what I needed. In my case my boost controller would kick the pump on at a certain manifold pressure.

Ok I will have to do some research and get back to you

Sent from my VS996 using Tapatalk

[Camaro96]

Is everything there to run it and have it come on as boost comes up

Sent from my VS996 using Tapatalk

[shownomercy]

Is everything there to run it and have it come on as boost comes up

Sent from my VS996 using Tapatalk

Again, this is just the pump/tank/line/nozzle.

You will need some device to turn it on, either a hobbs switch/relay, or a boost controller/relay, or a specific meth controller/relay.

[Camaro96]

Again, this is just the pump/tank/line/nozzle.

You will need some device to turn it on, either a hobbs switch/relay, or a boost controller/relay, or a specific meth controller/relay.

I understand I'm new to doing boosted LT-1. Usually the Boost of applications I deal with are root style blower and they're already running methanol for fuel.

Sent from my VS996 using Tapatalk

[shownomercy]

I understand I'm new to doing boosted LT-1. Usually the Boost of applications I deal with are root style blower and they're already running methanol for fuel.

Sent from my VS996 using Tapatalk

Something like this would work based on MAP sensor output
http://www.alcohol-injection.com/en/...ontroller.html

So, you can set when you want meth to come on and when you want it full on