LTx Gun Thread

**SS RRR** · 10-19-2015, 05:36 AM

Originally Posted by shownomercy

@SS RRR Did you say these were good?
http://aliengearholsters.com/walther...waistband.html

Yes those are good holsters as well as bladetech.

**gmpowered** · 10-20-2015, 11:06 AM

Originally Posted by Bad97Formula

Attachment 34415 Attachment 34416

What sights/optic you going to run?
Any reason in particular you opted for the wylde?

**Bad97Formula** · 10-21-2015, 09:42 PM

I will be running an Aimpoint T1. The wylde chamber is the best of both worlds. It was designed for accuracy with both .223 and 5.56x45 ammo. A standard .223 chamber can not handle the 556 pressures, ie, blown primers. The 556 chamber can shot both but it is not as accurate with the 223 cartridge.

**gmpowered** · 10-21-2015, 11:19 PM

Originally Posted by Bad97Formula

I will be running an Aimpoint T1. The wylde chamber is the best of both worlds. It was designed for accuracy with both .223 and 5.56x45 ammo. A standard .223 chamber can not handle the 556 pressures, ie, blown primers. The 556 chamber can shot both but it is not as accurate with the 223 cartridge.

I thought you might run a scope, because of the chamber. The .223 technically does handle sammi spec 5.56 its those rounds or chambers out of spec that can cause pressure problems. Chronographing ammo I can tell you its a crap shoot.