Catmaigne's "LolT1" Budget Boost Buildup

**Catmaigne** · 05-05-2014, 10:50 PM

And I'm gonna pull the center out tomorrow afternoon. I changed my pinion depth at the last second so the picture I posted a few pages back isn't what I'm running. I really should have left it alone because I moved the pinion in deeper thinking the pattern would be more ovate and diffused. Definitely too deep because she's LOUD. I'm going to pull it back out to what it was + another thou or two. I also want to decrease the pinion bearing preload because it whirrs like a straight cut gear. Rear only has about 30 miles (2 heat cycles) on it so I don't think I would have severely damaged anything. Gotta do it now.

**Catmaigne** · 05-08-2014, 04:13 AM

bmr hose mod.jpg

Hose mod did the trick. Sits even now, I'm happy.

A lot of the rear noise is gone but it still clunks. I made a shim for between the TA and mount but that didn't help. Definitely not my backlash or suspension. I think it might be loose axle splines in my wavetrac. I'll have to do some testing.

**Catmaigne** · 05-10-2014, 11:22 PM

Rear/clutch are about half broken in. I'll be breaking it in some more tomorrow night if the weather holds... rain has been on/off. No majors problems from what I can tell, just small stuff. I have to get my trim painted and put back on, grind the bump stops a little, and play with my tune before Thursday morning. The drive to OCMD should be smooth.

**Catmaigne** · 05-10-2014, 11:32 PM

I still have to detail the crap out of it too. Could really use a good wash/wax.

Was also thinking about throwing a cheapo pass through muffler on the car just for cruise week. My magnaflow keeps falling off while driving because of the dinky band clamps included and I've never been truly satisfied with how it fits. It flew off on 309 while breaking in the rear and scared the piss out of me (I thought my diff exploded lol), luckily no one was around.

***popo8*** · 05-10-2014, 11:52 PM

Originally Posted by Catmaigne

....Thursday morning. The drive to OCMD should be smooth.

Dont forget to keep in touch for ocmd gtg.

LTXtech.com is my DRUG!

**Catmaigne** · 05-10-2014, 11:55 PM

Will do. I've been having trouble finding the event page on Facebook.

***popo8*** · 05-11-2014, 12:01 AM

https://www.facebook.com/events/1425...ilter=upcoming

THAT^^^^ is the link to the FACEBOOK EVENT page for our LTXtech gtg. Im still trying to work out the when and where, although Im pretty sure the when on the event page will remain the same...

(FRIDAY (16th)

LTXtech.com is my DRUG!