Become a ltxtech.com member, Click here to register!

Thread: BACON BITES!

  1. #13881
    Lurker


    Status
    Offline
    Join Date
    Jul 2012
    Name
    Ben
    Vehicle
    1997 Z28 (SS clone)
    Location
    St. Charles, MO
    Posts
    2,690

    Default

    Check out what my dad picked up for me for $200 and its filled with a ton of tools (mostly diesel and will scrap or sell)
    Attached Images Attached Images

  2. The Following 2 Users Say Thank You to 30thSSclone For This Post:


  3. #13882
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by Blackbird96WS6 View Post
    Someone needs to put a 15 ft. antenna pole on their car and fly that baby like a flag on it! In fact, that should be the first run down the strip at the shootout!

    Sent from my screamin chicken pimped out SGSII
    Quote Originally Posted by firebird_1995 View Post
    The honorary first pass.
    Lol... I like it.

    Quote Originally Posted by 30thSSclone View Post
    Check out what my dad picked up for me for $200 and its filled with a ton of tools (mostly diesel and will scrap or sell)

    Good deal...sell. dont scrap!

    Larry (Popo8) Co-owner
    LTXtech.com


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  4. #13883
    InActive Member


    Status
    Offline
    Join Date
    Jan 2012
    Vehicle
    1997 z28 383 stroker
    Location
    oklahoma city,ok
    Posts
    2,859

    Default

    Quote Originally Posted by 30thSSclone View Post
    Check out what my dad picked up for me for $200 and its filled with a ton of tools (mostly diesel and will scrap or sell)
    Or give to me


    SMOKE TIRES NOT DRUGS

  5. #13884
    InActive Member


    Status
    Offline
    Join Date
    Jan 2012
    Vehicle
    1997 z28 383 stroker
    Location
    oklahoma city,ok
    Posts
    2,859

    Default


    I thought some of you would think this was funny


    SMOKE TIRES NOT DRUGS

  6. The Following User Says Thank You to casey20000007 For This Post:


  7. #13885
    Lurker


    Status
    Offline
    Join Date
    Jul 2012
    Name
    Ben
    Vehicle
    1997 Z28 (SS clone)
    Location
    St. Charles, MO
    Posts
    2,690

    Default

    Quote Originally Posted by popo8 View Post




    Good deal...sell. dont scrap!

    Larry (Popo8) Co-owner
    LTXtech.com
    one of the drawers is full of brass hose fittings, so ill probably sell those for scrap. then there are some diesel clutch allignment tools about the size of my forearm lol, so ill probably sell those

  8. #13886
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by casey20000007 View Post

    I thought some of you would think this was funny


    SMOKE TIRES NOT DRUGS
    B,F, and G.... giggidy!


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  9. #13887
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by 30thSSclone View Post
    one of the drawers is full of brass hose fittings, so ill probably sell those for scrap. then there are some diesel clutch allignment tools about the size of my forearm lol, so ill probably sell those
    The bigger the tool.. the more they cost.

    Post em up and sell em on CL.


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  10. The Following User Says Thank You to popo8 For This Post:


  11. #13888
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    So I've siphoned gas before. Several times. I needed to get gas from point a to point b today and couldn't find my trusty garden hose so I used a 5' piece of 3/8" hose. Big mistake. There's a certain "calibration" you get from siphoning fuel. You learn how many draws it takes to get the hose full without drinking it. Smaller hose=less draws. Not only did I take it in the mouth and face, but in the eye also. Luckily I wear contacts so I immediately rinsed my eye, removed them, and rinsed some more. Its feeling better now but im done for the day. The shit burns fellas. Ive learned my lesson. I'm getting one of these...
    http://www.amazon.com/gp/aw/d/B000HE...m_ps2?pi=SY125
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  12. The Following User Says Thank You to firebird_1995 For This Post:


  13. #13889
    InActive Member


    Status
    Offline
    Join Date
    Sep 2008
    Location
    NJ
    Posts
    744

    Default

    Quote Originally Posted by firebird_1995 View Post
    So I've siphoned gas before. Several times. I needed to get gas from point a to point b today and couldn't find my trusty garden hose so I used a 5' piece of 3/8" hose. Big mistake. There's a certain "calibration" you get from siphoning fuel. You learn how many draws it takes to get the hose full without drinking it. Smaller hose=less draws. Not only did I take it in the mouth and face, but in the eye also. Luckily I wear contacts so I immediately rinsed my eye, removed them, and rinsed some more. Its feeling better now but im done for the day. The shit burns fellas. Ive learned my lesson. I'm getting one of these...
    http://www.amazon.com/gp/aw/d/B000HE...m_ps2?pi=SY125
    All you need is 2 hoses and a rag. Long hose down in the gas, short hose in and seal the opening with a rag. Blow in the short hose and pressurize the tank and the fuel flows out of the other hose. You never get a mouth full of gas.
    John


  14. #13890
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Good idea. I think the tank on my Monte Carlo is vented though. Not sure if it would have worked on not. I'll never do it again. It burned like hell
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

Page 1389 of 2291 FirstFirst ... 3898891289133913791385138613871388138913901391139213931399143914891889 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •