- Navigation
Results 1 to 10 of 28
-
12-15-2008, 06:59 PM #1
20% off our alternator reloc. kits
I got a call today and he wants to move some stock before the end of the year
The alternator only kit comes complete with billet bracket, spacer, grade 8 hardware, belt and detailed instruction. The only thing required is to lengthen the wire for the alternator.
+ your choice of polished or satin finish
We have belts for both stock diameter and underdrive crank dampers.
$187.99 shipped in polished
$159.99 shipped in satin
pics
The second kit is our alternator & power steering relocation kit which comes with billet brackets, custom tensioner, grade 8 hardware, belt and detailed instructions. The unit keep the PS pump very close to the stock location, so the stock lines and reservoir can be used. The same goes here to lengthen the alternator wires.
+ your choice of polished or satin finish
We have belts for both stock diameter and underdrive crank dampers.
$347.99 shipped in polished
$319.99 shipped in satin
pics
T/A kid
my car
misc
These are not online, so you have to call to place your order.
thanksLarry @ Speed Inc.
FOR SALE
97 Z/28 SI 396, SI H/I, LE H/R, FLT Level 7 w/ Yank SS3600, S60 w/ spool & 3.73, UMI Suspension, Nitrous Outlet
10.62@126 NA 1.40 60ft
9.67@138.9 200 shot 1.31 60ft
best MPH 140.5
GM High Tech cover car April 2009
www.speedinc.com
-
12-15-2008, 07:10 PM #2Pr0jekt Turb0?
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,621
ok redited: is/can the ac be deleted with the ps and alternator kit?
Last edited by Z28pr0jekt; 12-15-2008 at 07:19 PM.
-
12-15-2008, 07:19 PM #3Larry @ Speed Inc.
FOR SALE
97 Z/28 SI 396, SI H/I, LE H/R, FLT Level 7 w/ Yank SS3600, S60 w/ spool & 3.73, UMI Suspension, Nitrous Outlet
10.62@126 NA 1.40 60ft
9.67@138.9 200 shot 1.31 60ft
best MPH 140.5
GM High Tech cover car April 2009
www.speedinc.com
-
12-15-2008, 07:20 PM #4Pr0jekt Turb0?
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,621
ok just checking, i've never in depth paid attention to the accessories or brackets so yea thanks
-
12-15-2008, 07:23 PM #5Larry @ Speed Inc.
FOR SALE
97 Z/28 SI 396, SI H/I, LE H/R, FLT Level 7 w/ Yank SS3600, S60 w/ spool & 3.73, UMI Suspension, Nitrous Outlet
10.62@126 NA 1.40 60ft
9.67@138.9 200 shot 1.31 60ft
best MPH 140.5
GM High Tech cover car April 2009
www.speedinc.com
-
12-16-2008, 09:46 AM #6
I would like to see a kit that moves the Alt. to the Driver side down by where the air pump goes. And still keep ac and ps!
1 of 16, WS6 Clone, 1.6 rr's, LS1 front brakes w/hawk hp+ pads, KYB 8 way Adj. shocks,Hurst short throw shifter, !EGR, !CAT, MAC lowering springs, BMR Sub Frames, BMR LCA's and Relocation brackets
cut-out, MAC headers with Y-pipe, 295rwhp, 328rwtq
-
12-16-2008, 09:52 AM #7Larry @ Speed Inc.
FOR SALE
97 Z/28 SI 396, SI H/I, LE H/R, FLT Level 7 w/ Yank SS3600, S60 w/ spool & 3.73, UMI Suspension, Nitrous Outlet
10.62@126 NA 1.40 60ft
9.67@138.9 200 shot 1.31 60ft
best MPH 140.5
GM High Tech cover car April 2009
www.speedinc.com
-
12-16-2008, 12:32 PM #8
gosh i wish i would have waited to install my manual rack.... i could have saved 30 bucks
-
12-16-2008, 04:01 PM #9
I would like to see a kit to mount a LS1 powersteering pump down on the drivers side. I'd use your alternator only kit with it.
-
12-16-2008, 07:18 PM #10
Bookmarks