Lots of 94 LT1 parts

[noice]

Clean title - $600 for the body.
396 and 388 for sale
MSD Opti (95+), MSD coil(new style), Digital 6 Ill let all of it go for $500 shipped to 48 states.
I also have a set of green top SVO 42lb injectors $175

Mark
pmr253@gmail.com or 850-723-2104 to get a hold of me.

[djjab57]

Were are you located ?

[noice]

72758 NW Arkansas

[firebird_1995]

How much life left in the drag radials?

[nitroheadz28]

I've never seen that strut tower brace and can't find anything like it, what brand/ type is it? Just want to see where the 3rd mounting point is. Thanks

Also thinking about those Optis, I have MSD ignition too and something is on its way out.

[Tyler Wheat]

Is this a full part out?

[noice]

I've never seen that strut tower brace and can't find anything like it, what brand/ type is it? Just want to see where the 3rd mounting point is. Thanks

Also thinking about those Optis, I have MSD ignition too and something is on its way out.

Granatelli is the brand, they don't make them anymore. The third mount goes under the cowl. Had it on the car when it was stock.
It mounts like this one. http://ls1tech.com/forums/attachment...e-imag0136.jpg

[noice]

I barely used the things, DarkC5 off LS1tech sold them to me saying they had lots of tread left. I never got them to the track and put maybe 200 miles on them on the street. There is probably less than half tread left on them but I'm try to get rid of the rims and don't really want to separate them. I think it is a fairly good price seeing how the tires are $200 new and they are already on rims.

[noice]

Is this a full part out?

Sold/gave away a lot of stuff at the shootout this year.

List of sold items
BMR Lower A Arms
BMR Upper A Arms
BMR K-Member
Spohn Torque Arm
Spohn Lower A Arms
Spohn Upper A Arms
UMI Lower Control Arms
UMI Panhard Bar
Moser 12-bolt 3.73 gears 33 spline posi with 3-channel brakes
LT1 Computer with Ed Wright tune on it.
LS1 front brake conversion spindles
Accessory Bracket
Edelbrock Adjustable Coilovers
Canton Oil Pan
LS1 Driveshaft

List of stuff that is still around.
Still got most of the wiring and all of the interior for the car.
Have a Spec 3 Clutch, 2 Spec Flywheels
RPM T56 Transmission
There is stuff that I'm forgetting for both lists. The backstory is this, some kids vandalized the car so that it was going to be 5K to fix the convertible top and all of the paint. Pulled the motor and put it in the race car and went to the shootout for the first time.

I also have a couple of LT1 engines that could be for sale at the right price. One 385ci LT1 and one 396 LT1 that was in the shootout car. The alcohol injection setup I'm most likely keeping though.
385CI - http://ls1tech.com/forums/15587467-post1.html
396CI - Makes 546TQ @ 4600 and 585HP @ 6000 at the flywheel.

[noice]

http://ltxtech.com/forums/showthread...l=1#post257851

Also an intake for sale.