- Navigation
Results 1 to 9 of 9
Thread: Ported LT1 Heads
-
08-07-2009, 10:54 PM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Brandon, FL
- Posts
- 168
Ported LT1 Heads
I have a set of ported 1.94's that really rock and roll. These are the heads I ran last yr and was happy with the results. Last week they were taken to Eisele's machine shop, Tampa and completely checked, cleaned, bowl polished, Port matched to the Intake manifold, Surfaced .005", 3 angle competition valve job with all new valve guides inst and new .540" lift springs. They are ready to bolt on and go. Springs are good for LT4 hot cam, ZZ9, cc305, etc, and are inst with 130lbs closed seat press.
Casting # 10207640
$600.00 obo
SOLD, sale pending!Last edited by roadrocket; 08-19-2009 at 09:26 AM.
Charlie
Still in the game!
-
08-13-2009, 05:35 PM #2
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Brandon, FL
- Posts
- 168
reduced to $500 obo. Need to sell these.
Charlie
Still in the game!
-
08-16-2009, 04:43 AM #3
InActive Member
- Status
- Offline
- Join Date
- Feb 2009
- Location
- The Cowboy State
- Posts
- 1,259
Who originially did the porting
-94 Z28 355 M6 24X E-85 21* TRICKFLOWS TH400 S60
C5 Z06 IN ROAD RACE TRIM. COMING SOON
-
08-16-2009, 12:02 PM #4
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Brandon, FL
- Posts
- 168
a local race shop in Denver by the name of A.I.R. Orig according to ebay seller.
I ran these last year and liked them.
After I took them off the went to Eislies mach shop in Tampa to be cleaned up and all new bronze valve guides inst along with new springs. These are ready to bolt on and go.
My orig set is ready and will be used. I have 3 spare sets of heads. These are the only ones that are ported besides the OEM set.
$500 and I'll cover the $50+ shipping!Charlie
Still in the game!
-
08-16-2009, 10:24 PM #5
InActive Member
- Status
- Offline
- Join Date
- Aug 2009
- Posts
- 25
pm'ed you
-
08-16-2009, 11:55 PM #6
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Brandon, FL
- Posts
- 168
back to ya
Charlie
Still in the game!
-
08-17-2009, 12:13 AM #7
LTX Regular
- Status
- Offline
- Join Date
- Oct 2008
- Vehicle
- 1994 LT1 Camaro
- Location
- Port Charlotte, Florida
- Posts
- 479
Do you have any better pics that show the valve guide area in the intake and exhaust ports?
94 Camaro: 10.57@127, AI H/C, stock bottom, 150 n20, TH400, 8.8 rear (11.49@119 n/a T56)
99 Z28 1SC Stripper: 5.3, S480, Th400, MWC 9"
-
08-17-2009, 07:42 AM #8
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Brandon, FL
- Posts
- 168
sure Phil. Intake side has been port matched.
Charlie
Still in the game!
-
08-19-2009, 09:26 AM #9
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Brandon, FL
- Posts
- 168
SOLD, sale pending!
Charlie
Still in the game!
Reply With Quote
Bookmarks