Belt length

[boosted95z]

I am nearing the end of the build and one thing I cannot find out since the car isn't at my house. What length belt will I need for a vortech v1 with a 2.95" pulley and the 6.66" crank pulley?

[BLOWNDFIZ]

I'm not sure of the exact length I used. What I did was measure the stock vortech supplied belt. Went to NAPA and bought 3 different belts and did trial and error till I found one I liked.

My set-up is a custom ASP 6.75" crank and 2.95" blower pulley. I can get the part number off my belt when I get home if you want me to.

[boosted95z]

That would be awesome if you could. I just need an estimated length to judge mine off.

[BLOWNDFIZ]

I just went and looked. The car is on the lift and of course the belt number is not visible at all from the bottom. I'm sorry. I'll have to get on the ladder and lift the hood to see if I can see the number.

[boosted95z]

No worries. No rush. I still have 2 weeks before the car is done and goes to the tuner.