- Navigation
Results 1 to 6 of 6
Thread: Unknown wires
-
09-23-2008, 10:05 PM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 100
Unknown wires
Here are two pictures of two wires that are unconnected and I have no clue where they are supposed to go.
The wire I'm talking about here is the light green one. It's coming from the wire protector with the silver wrap around it. It's pretty long and right now I have it just dangling by the headers.
This wire is coming from under the dash close to the steering wheel. It's black and has a red stripe, or red with a black stripe.
What are these wires for and where do I connect them?1994 Camaro Z28 A4 - 357ci, CC306, 918's, ProMag 1.6 NSA, GM guideplates, chromoly PRs, LS7 lifters, Granatelli MAF, ACCEL Coil, CAI, Pacesetter LTs to 2 1/2" true dual mufflers, 4:11, tuned by PCMforLess and modded by myself, !AIR, !EGR, turning till 6000 on stock shortblock
-
09-23-2008, 10:40 PM #2
Needs Driver Mod
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Athens, GA
- Posts
- 1,872
Maybe they went to an aftermarket gauge of somekind???
1997 Trans am- M6- Ebay Longtubes, Summit X pipe with Magnaflows, CAI, Adj LCAs with relocation brackets, Comp engineering shocks, Competition stage 2 clutch.
-
09-23-2008, 10:48 PM #3
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Joliet, IL
- Posts
- 360
Yeah, are you the second owner of this car or something? Probably a prev. owner's abandoned project...
-
09-23-2008, 11:52 PM #4
Founding Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Memphis, TN
- Posts
- 349
I would be willing to bet that wire is for a warning system for an electric water pump. I have done the same wiring in the same areas. I added a temperature sensor to the passenger side of the block and ran a wire to the gauges for a led warning light and buzzer. Could also be used for a simple gauge.
-
09-24-2008, 02:47 PM #5
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 100
Yea, I'm not the first owner, I bought it and I've been trying to bring it back from a knocking engine and other SES codes.
1994 Camaro Z28 A4 - 357ci, CC306, 918's, ProMag 1.6 NSA, GM guideplates, chromoly PRs, LS7 lifters, Granatelli MAF, ACCEL Coil, CAI, Pacesetter LTs to 2 1/2" true dual mufflers, 4:11, tuned by PCMforLess and modded by myself, !AIR, !EGR, turning till 6000 on stock shortblock
-
09-25-2008, 01:49 PM #6
Founding Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Joplin, MO
- Posts
- 1,723
More than likely it was a gauge or something similiar another owner took out, but didn't take the time to take out everything...
1997 Camaro Z28
Lots of visual horsepower, full bolt-ons, and a little spray....
Originally Posted by quik95lt1
Reply With Quote
Bookmarks