- Navigation
Results 1 to 8 of 8
Thread: Long or short studs
-
02-27-2009, 10:57 PM #1
socalmuscle.net
- Status
- Offline
- Join Date
- Sep 2008
- Location
- San Diego, CA
- Posts
- 120
Long or short studs
Should I use long or short wheel studs? What are the benefits of both? Do the long ones look good with street gear on? Can I use shank lugs with short studs? What are ya'll running?
Last edited by 95Yardbird; 02-28-2009 at 10:57 AM.
-
02-28-2009, 03:23 PM #2
socalmuscle.net
- Status
- Offline
- Join Date
- Sep 2008
- Location
- San Diego, CA
- Posts
- 120
So no input from anyone. Is everyone running stock studs?
-
03-02-2009, 05:31 PM #3
socalmuscle.net
- Status
- Offline
- Join Date
- Sep 2008
- Location
- San Diego, CA
- Posts
- 120
Still nothing, what the heck?
-
03-02-2009, 08:42 PM #4
Bastardized LT1 Car
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Lynchburg, Va
- Posts
- 1,804
where ever possible i would run longer and bigger studs...ARP would be a good choice. but some dont like them because you have to use open lugs and they show through and look not so great
:Jon:
94 Z28 - Turbo LQ4 Build - T56 - Moser 9"
06 Tundra DD - Michelin Go Fast tires
99 WS6 T/A - 3800 Stall - 3.73 Gears
07 Hayabusa - blacked out - brocks/hindle exhaust - sprocketed - PCIII - lowered & stretehed
09 Yamaha R6 - Sold
-
03-02-2009, 09:38 PM #5
socalmuscle.net
- Status
- Offline
- Join Date
- Sep 2008
- Location
- San Diego, CA
- Posts
- 120
So what about just using the arp studs in the "short" length? Are these still longer then stock?
-
03-02-2009, 10:23 PM #6
Bastardized LT1 Car
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Lynchburg, Va
- Posts
- 1,804
what i did when i wanted longer studs, i bought stock front studs from GM and put them in teh rear...that was with the 10 bolt, the 12 bolt and 9" both have ARP's but i still wanna get extended studs
:Jon:
94 Z28 - Turbo LQ4 Build - T56 - Moser 9"
06 Tundra DD - Michelin Go Fast tires
99 WS6 T/A - 3800 Stall - 3.73 Gears
07 Hayabusa - blacked out - brocks/hindle exhaust - sprocketed - PCIII - lowered & stretehed
09 Yamaha R6 - Sold
-
03-03-2009, 07:17 AM #7
socalmuscle.net
- Status
- Offline
- Join Date
- Sep 2008
- Location
- San Diego, CA
- Posts
- 120
What is the length of the stock studs?
-
03-03-2009, 04:15 PM #8
Bastardized LT1 Car
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Lynchburg, Va
- Posts
- 1,804
stock fronts are about 3/8" longer and were what i needed for more contact on the cheap if you buy them from GM they will be if from the parts store you will get the same length as stock... but i will say if you have the money to sped on ARPs then do it
:Jon:
94 Z28 - Turbo LQ4 Build - T56 - Moser 9"
06 Tundra DD - Michelin Go Fast tires
99 WS6 T/A - 3800 Stall - 3.73 Gears
07 Hayabusa - blacked out - brocks/hindle exhaust - sprocketed - PCIII - lowered & stretehed
09 Yamaha R6 - Sold
Reply With Quote
Bookmarks