- Navigation
Results 101 to 104 of 104
Thread: 398 stroker Build
-
03-20-2025, 04:47 PM #101
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,350
The data log can only show the position commanded by the PCM. Unfortunately there is no feedback as to the actual position.
Isn't the IAC actuated by a stepper motor…… rotates the pintle to screw it in and out. I wasn’t aware there is a spring involved.SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
The Following User Says Thank You to Injuneer For This Post:
-
03-23-2025, 06:26 PM #102
Pr0jekt Turb0?
- Status
- Online
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,621
It looked like this but was stuck all the way down:
Originally Posted by Injuneer
https://www.oreillyauto.com/detail/c...t-camaro?pos=1
-
The Following User Says Thank You to Z28pr0jekt For This Post:
-
03-27-2025, 11:13 AM #103
Administrator
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,560
Supporting Member
doing the baer gt plus kit?
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.64 @ 139.4mph
1994 Camaro Vert - SBE LE1 Summit 8802 Cam - The Cruiser
1995 Firebird Formula - Dark Aqua Metallic - maybe restore?
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E/Holley Terminator EFI
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
The Following User Says Thank You to SSlowBoat For This Post:
-
05-05-2025, 08:48 PM #104
Moderator
- Status
- Offline
- Join Date
- Sep 2008
- Location
- T E X A S
- Posts
- 1,387
What ever the 6 piston kit is, 13" rotor. They're on the car now, next stop is to go by the body shop that painted it and make arrangements to bring it back to fix the rear quarter panels on it. After that charge the AC and drive it. I need to check the fluid level in the 12 Bolt, there is a leak at the axle tube. That maybe a next year project. I want to put the old brakes on my friends 96 Camaro SS, he has torque thrusts so he's a bit limited.
On the throttle body, an extra spring was added to the throttle body. From what the tuner said, they said the spring on the blades felt like its lost some tension, so by nature when you depress the throttle it may not be opening smoothly or fluttering some what at part throttle, kind of jerky causing some bucking. He said the extra spring should give it a little more tension and make the throttle feel a little smoother. He couldn't find in the rpm range it would do it where it was fuel or timing issue. Seems to open up fine at WOT though
Neil Biswas - Trans Am.png
DSC01013.JPGLast edited by Neil350; 05-08-2025 at 08:56 AM.
93 T/A Hard Top l 398" l Dart Pro-1s + Single Plane l N2O Outlet Spray Bar l 24X SD Tuned l Street twin + M6 l 12 Bolt 3.90 l Fikses
-
The Following 6 Users Say Thank You to Neil350 For This Post:
Reply With Quote
Bookmarks