Holley Terminator X Max

[1QUICKZ28]

Anyone running this system? Been talking with Mike at EFI Connection. They make an engine harness to run this ECU. Looking at the Max due to my 93 Speedometer. I already have their billet T/C kit to swap to 24X.

Here’s the deal, I’ve been gathering parts for years to build a badass supercharged LT1 engine. Life has thrown in a few curveballs that has postponed this build several times. Hoping to get it together this year. I have everything to put together a 383, forged crank, pistons, H beam rods, total seal rings, Melling shark tooth oil pump, splayed block and LE Trickflow heads hogged out to the Max. I Just picked up a Vortech V7 YSI Race and Mishimoto intercooler. I have 3 custom ground supercharger cams from members on here that had similar setups. All different specs. Several different crank pulleys and methanol injection. I have options to run several different cam and pulley setups. ECU and harness are my next big purchase. Looking at this for ease of tuning. I see lots of LS swaps using these and people seem to love it. Just wanted to see if anyone on here has any experience.


Sent from my iPhone using Tapatalk

[SSlowBoat]

@shownomercy i believe is running one albeit with a stand alone harness not a efi connection harness

Sent from my SM-N975U using Tapatalk

[shownomercy]

If you have the 24x sensors already, and you have some comfortable-ness working with harnesses, its super easy to install.

I have mine setup as a semi stand alone, IE, holley runs motor and trans, but is not tied to car at all. I run the holley 7in dash cause my factory cluster was on its way out.

I love mine, remote tuning is amazing and I enjoy driving the car much better now. Tons of safety options you can setup, your imagination is the limit. Software is easy to setup and the holley self setup will get the car running/driving fairly awesome. (just DO NOT rely on the wizard tune for any sort of boost)

[1QUICKZ28]

If you have the 24x sensors already, and you have some comfortable-ness working with harnesses, its super easy to install.

I have mine setup as a semi stand alone, IE, holley runs motor and trans, but is not tied to car at all. I run the holley 7in dash cause my factory cluster was on its way out.

I love mine, remote tuning is amazing and I enjoy driving the car much better now. Tons of safety options you can setup, your imagination is the limit. Software is easy to setup and the holley self setup will get the car running/driving fairly awesome. (just DO NOT rely on the wizard tune for any sort of boost)

Thank you! You helped put my mind at ease. I’m gonna bite the bullet and hopefully get started on this build soon. Trying to get the garage cleaned up to make room.


Sent from my iPhone using Tapatalk

[shownomercy]

Thank you! You helped put my mind at ease. I’m gonna bite the bullet and hopefully get started on this build soon. Trying to get the garage cleaned up to make room.

Sent from my iPhone using Tapatalk

Good luck finding one in stock lol

If you have any specific questions lemme know.

[1QUICKZ28]

Will do. I hear they are not shipping very well. Like everything today. Thank you!


Sent from my iPhone using Tapatalk