Need advice 700r4 vs. 4l60e ls swap into 93 z

[bustedassz28]

It is for sale in the for sale section, i liked mine alot too............ @firebird_1995

[bustedassz28]

Thx for all the info, definitely will help in making my choice...

[carlybelle1988]

What are you using for induction on the LS? If you're going traditional front facing throttle body, then you won't have any way to accommodate the 700 / 4L60 throttle valve cable. While Bowtie Overdrives offers a bracket / pivot kit, the jury is still out on how well they work. The cable adjustment and geometry are crucial for transmission life.

Yes, the 700 / 4L60 will bolt to the LS if leaving out 1 bell bolt but the converter holes won't line up with the LS flexplate holes. The LT uses an SAE circle and the LS uses a metric circle.

$250 is a decent price to swap the output shaft.

Sell the Edge and invest in a quality converter.

The 4L60E will be "tunable" through the PCM. Getting shift points correct with the 700 / 4L60 is a little more messy because it requires crawling under the car and pulling the governor. Getting the governor cap off and on with the trans in the car can be a PITA.

Both the 700 / 4L60 and 4L60E are equal in strength.

Does the same go for a 700r4 going in a 94 lt1?


Sent from my iPhone using Tapatalk