The Return of Tubby Z28

[popo8]

zr1 duraflex bumper was a waste of $457 and 4 hours of time. I'm so pissed off right now. the drivers side kind of fit, the passenger side was molded twisted, and upon attempting to get it to be kind of close, the bumper bends too far forward and does not come even close to catching the headlight bar to be mounted to. about a 2" gap. biggest waste of fucking money ever. ontop of that, there is about 4" too much material and the wrong curve direction where the bumper meets the fender at the ends by headlights. even cutting it doesn't allow it to work

I'm done for the year. I'm stupid for even trying. should have just got the mcnord or a stock bumper and been done.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Complain to them and return it.

Sent from my SM-G955U using Tapatalk

[SSlowBoat]

Complain to them and return it.

Sent from my SM-G955U using Tapatalk

I already cut pieces off it trying to make it fit, so they won't return it

Sent from my SAMSUNG-SM-G935A using Tapatalk

[popo8]

I already cut pieces off it trying to make it fit, so they won't return it

Sent from my SAMSUNG-SM-G935A using Tapatalk

When there were issues with my first durables spoiler... they sent me another a s didn't even request the 1st one back which I sent pics of, after the body shop worked it...

Sent from my SM-G955U using Tapatalk

[harner]

Done for the year? Go buy a bumper cover for $30 at the yard, you can at least enjoy the car for a couple months before the shit weather/roads plague PA.

[SSlowBoat]

Done for the year? Go buy a bumper cover for $30 at the yard, you can at least enjoy the car for a couple months before the shit weather/roads plague PA.

I have other things to do to the car that kinda were planned with this bumper in mind. now have to redo those plans.

really looking at merging a stock and this bumper together

Sent from my SAMSUNG-SM-G935A using Tapatalk

[harner]

I have other things to do to the car that kinda were planned with this bumper in mind. now have to redo those plans.

really looking at merging a stock and this bumper together

Sent from my SAMSUNG-SM-G935A using Tapatalk

Good luck with that lol.

Working with plastics is a PITA, but at least they bend (unlike fiberglass, etc). I have used a heat gun on low heat and straps to help reshape/remold pieces. It doesn't work so well with stretching, but plastics in general are a PITA and require magic to get right. I'm sure with enough fiberglass, you could make anything work.

[SSlowBoat]

Good luck with that lol.

Working with plastics is a PITA, but at least they bend (unlike fiberglass, etc). I have used a heat gun on low heat and straps to help reshape/remold pieces. It doesn't work so well with stretching, but plastics in general are a PITA and require magic to get right. I'm sure with enough fiberglass, you could make anything work.

I've been reading up on it and it seems pretty straight forward, just finding that straight cut is the hard part


3000gt guys do it alot with 2nd gen bumpers and fibre glass lower bumpers

Sent from my SAMSUNG-SM-G935A using Tapatalk

[SSlowBoat]

well, bumpers are cut. rough shape works out except one big issue. the pointed look of the stock bumper is about 2" further out than the zr1 bumper which doesn't have a point. when you bend down the stock point to be flush the car gets very dodge avenger (90's style).

If I extend the zr1 lower bumper out I would have the top further out than the bottom, which would look funny

decisions

Sent from my SAMSUNG-SM-G935A using Tapatalk

[popo8]

Can u post pictures?

Sent from my SM-G955U using Tapatalk

[SSlowBoat]

Can u post pictures?

Sent from my SM-G955U using Tapatalk

I will later today. it gets dark quick lol.

Sent from my SAMSUNG-SM-G935A using Tapatalk