FAST Billet Rails, Fuelab Regulator, LPE 100MM MAF/Harness

[Fastbird]

Getting rid of stuff I don't need.


FAST Billet Rails. I cleaned these up as they were painted black. There are some superficial nicks from the previous owners installation job on the manifold side of the rails. Comes with brackets and bolts for installation to a FAST 102 manifold (and maybe others, not sure). $75 shipped








Fuelab Regulator with mounting bracket - Dual in -6 straight cut o-ring, single out -6 straight cut o-ring setup. Front port for installing a gauge. Has one blockoff plug installed as seen. $100 shipped





LPE 100mm MAF - Some installation nicks on housing as it had been essentially pried into a coupler too small for it (not by me again, previous owner). DOES come with the adapter harness for the split MAF/IAC setups, but the harness is probably junk as it apparently contacted something and chaffed the wire insulation pretty good. Would work if you covered and kept them separated though as the wiring itself appears to be fine, but it's only a $25 piece anyway. $200 shipped