- Navigation
Results 61 to 67 of 67
Thread: My 96 build
-
07-14-2015, 10:37 PM #61
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Went to th track tonight, This was with 175 jets and set pretty rich on the fuel. Still playing with the progressive and launch RPMs.
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
The Following User Says Thank You to waltsfastz For This Post:
-
07-15-2015, 05:57 AM #62
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Nice, get that 60 down into the 1.3s and you'll be low 10s.
Any videos?
-
07-15-2015, 08:29 AM #63
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
I heard that. Coverter is pretty tight, I think I need to up the 2 step some more. It was leaving at 3000. First spray pass I delayed the nitrous, leaving at 60%@.5 sec delay and at 100% at 1 sec. 60 ft was a 1.6ish. This pass came out @100% and it dropped to 1.55. Hot as hell, Humid and muggy.
Originally Posted by dawdaw
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
07-15-2015, 08:32 AM #64
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
BTW I got a good video Ill upload later
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
The Following User Says Thank You to waltsfastz For This Post:
-
07-15-2015, 06:58 PM #65
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Looking forward to the video. That things a beast man!
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
07-15-2015, 08:50 PM #66
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Here ya go.
https://youtu.be/splJ9nulW-o
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
-
07-25-2016, 07:58 PM #67
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
So I broke the windshield last year with a ratchet strap I was using to hold to hood up. Got a new one and pulled all the plastic vents off and looked at it for a few minutes, picked up a cut off wheel and went to work. There is a ton more room. Not the prettiest but the plastic covers it all up. IMG_1759.JPGIMG_1757.JPGIMG_1760.JPG
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
The Following User Says Thank You to waltsfastz For This Post:
Reply With Quote
Bookmarks