Become a ltxtech.com member, Click here to register!

Results 1 to 8 of 8
  1. #1
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default Spool bus partout

    I'm listing this stuff for Dustin Baker, owner of the "spool bus". I will vouch for everything. This is what's left over. Shipping extra and will be from 47456. You can respond through me or directly to him at grim_reaper888@hotmail.com

    Single turbo setup, $200. Was the first design on the "spool bus". T4 flange, 2.5" crossover, Tial style wastegate flange

    Stainless turbo headers, $350. Wrapped, 3" v-band outlets, flanges were ground on a head surfacer.

    Quick time sfi t56 bellhousing. PN RM-9023 $250
    https://www.summitracing.com/parts/qti-rm-9023

    TCI sfi neutral balance flexplate, PN 399174, $50
    https://www.summitracing.com/parts/tci-399174

    Accel opti with MSD cap, unknown condition, with good MSD coil and ICM $75

    Powermaster starter, PN 9100. About a year old. $75
    https://www.summitracing.com/parts/pwm-9100

    Granatelli high flow MAF. $100. For cold air intake applications.

    LT1 fuel rails with Aeromotive FPR, pressure gauge, and AN quick connects. $175

    Accessory bracket with power steering pump, $25

    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  2. #2
    Long Live the Opti


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Sean
    Vehicle
    1999 Twin Turbo Corvette
    Location
    Fort Wayne, IN
    Posts
    12,072

    Default

    Not to hijack, but I have been watching on FB. He sure got that LS fit in there quick huh? Can't wait to see what's in store for (I assume he's going to call it) Spool Bus 3.0.
    Quote Originally Posted by Ryan Stout View Post
    I would try to work my neck muscles but I'm not invited to the LS guy parties.

  3. #3
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    He had the ls sitting on the floor with a reasonable distance in between the lt parts when I went to visit. The original yellow spool bus is getting lifted up and possibly another ls but I'm hoping a visit to the shootout will change that. The red spool bus is going to be a beast
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  4. #4
    Xtreme Member


    Status
    Offline
    Join Date
    Mar 2015
    Name
    Dan Dalessandro
    Vehicle
    1997 Camaro Z28
    Posts
    2,211

    Default

    Hmmm do I want that bellhousing

    14.307@98.21, 2.155 60'

    97 Z28, M6 with stuff done to it. SHOOTING FOR 12s IN A BOLT ON LT1 BOYS

  5. #5
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Quote Originally Posted by Dan View Post
    Hmmm do I want that bellhousing
    Are you the proud owner of a t56 transmission and fully developed and functional legs you enjoy being able to stand and walk with?
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  6. #6
    VIP Member


    Status
    Offline
    Join Date
    Mar 2009
    Location
    IN
    Posts
    2,818

    Default

    I can vouch for seller. Good friend of mine.

    Sent from my SM-G900V using Tapatalk

  7. #7
    Lurker


    Status
    Offline
    Join Date
    Jul 2013
    Vehicle
    95 Firehawk
    Location
    Indiana
    Posts
    58

    Default

    Bellhousing recieved. Now if I can just get the 24x stuff and fuel injectors, I will be well on my way.

    Thanks

  8. #8
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Quote Originally Posted by tazman71 View Post
    Bellhousing recieved. Now if I can just get the 24x stuff and fuel injectors, I will be well on my way.

    Thanks
    I actually bought his 24x stuff if you are looking. I probably won't use it
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •