- Navigation
Results 11 to 15 of 15
-
03-19-2016, 09:55 AM #11
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,352
Could you possibly be confusing the pre-load studs that stabilize the bearing caps with the axle tube brace bolts? I have never seen a TA cover with holes for the axle tube braces, and they do not show them in their online catalog.
Originally Posted by 96.Z28.SS
SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
03-19-2016, 11:02 AM #12
InActive Member
- Status
- Offline
- Join Date
- Feb 2016
- Name
- Chase
- Vehicle
- 1996 camaro z28/ss
- Posts
- 29
Yes that is the cover I have. I thought those black nuts and gold bolts next to the logo was for additional bracing
-
03-19-2016, 12:49 PM #13
Lurker
- Status
- Offline
- Join Date
- Dec 2013
- Location
- SoCal
- Posts
- 250
no, they are to put pre-load on the bearing caps. IIRC TQ is 5 ft lbs...but there should be 411 on that with the cover
96 BBB 383/T56
-
03-19-2016, 02:50 PM #14
InActive Member
- Status
- Offline
- Join Date
- Feb 2016
- Name
- Chase
- Vehicle
- 1996 camaro z28/ss
- Posts
- 29
Well d*mn it. I wanted to stengthen up the 10 bolt. I guess I'll just weld the axle tubes and put on the cover.
-
03-21-2016, 01:49 PM #15
InActive Member
- Status
- Offline
- Join Date
- Feb 2016
- Name
- Chase
- Vehicle
- 1996 camaro z28/ss
- Posts
- 29
Thank you everyone for the quick replies and good information
Reply With Quote
Bookmarks