TNT 8.8, anyone here have one?

[Vicious95Z28]

http://i1155.photobucket.com/albums/...102_164223.jpg
And for this interested in this build I pretty much have the 8.8 ready to ship. I've gotta save a few more dollars so that I can ship my stuff so I'm holding out on pulling my rearend from under my car. No need to disable it before I'm ready.

Sent from my SM-S975L using Tapatalk

[Catmaigne]

Put it on a scale when it's all together, I am curious

Sent from my VS986 using Tapatalk

[97 6speed z]

Popo, that's the labor. You send Josh the empty 8.8 center section with 3" of tube sticking out each side and you chop the 7.5 axle tubes off at the center section and send those as well. In my case I also wanted the LPW support cover and back brace package that works with the cover so I'll be sending that as well. Josh will narrow the rear if that's what you want and I do so that will cost me a little bit extra and Josh will fab the Hiltsy mount for the Torque Arm. Once he's done he'll ship the diff back and you reassemble. You have to order new axles but he'll help you with that.

Sent from my SM-S975L using Tapatalk

And what's the current junk yard price for a Ford 8.8? And what Ford vehicles had them?

[Vicious95Z28]

I gave $100 for mine. You're looking for an 8.8 from a mid 90's - 01 Explorer, F150, full size Bronco if you want the 31 spline unit or a 90+ 4.0 Ranger.

Sent from my SM-S975L using Tapatalk

[fast97tta]

sweet sounds intresting , My look into this.

[Vicious95Z28]

sweet sounds intresting , My look into this.

There are beginning to be several around.

Sent from my SM-S975L using Tapatalk