- Navigation
Results 1 to 9 of 9
-
07-13-2015, 06:58 AM #1
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Can you pull the oil pan with engine in car?
IF the trans and clutch is removed? It has a stock k member
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
07-13-2015, 10:28 AM #2
Banned
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Big Papi
- Vehicle
- 2015 Fusion Titanium AWD
- Location
- Moscow Mills Mo
- Posts
- 7,241
- Blog Entries
- 1
Yes, done it before with a 6 speed. you will need to lift the motor till it almost tops out on the trans tunnel though and turn the crank to clear it in certain spots.
-
07-13-2015, 01:09 PM #3
InActive Member
- Status
- Offline
- Join Date
- Jan 2012
- Vehicle
- 1997 z28 383 stroker
- Location
- oklahoma city,ok
- Posts
- 2,859
I did just recently I used this
got it from harbor freight
Smoke tires not drugs
-
07-13-2015, 05:09 PM #4
InActive Member
- Status
- Offline
- Join Date
- Oct 2008
- Name
- Jim
- Vehicle
- 1996 Z28
- Location
- Sugar Grove IL
- Posts
- 1,243
Just did my sons with an automatic. He has a tubular k member though. We pulled the through bolts on motor mounts and engine hoisted it up. Came right out. Crank counter weight was even in right position. Make sure to take oil level sensor out before you remove pan.
1996 camaro Z28, Clayton racing 398, Rossler TH350 rmvb with brake, FTI billet race converter 4400, Dana S60 with 4.10's, 300 shot, Accel DFI controlled, UMI, Spohn, PA racing, QA1's, Baer brakes, 325/45/17 M&H, Caged, Corbeau's, Simpson, etc.
From zero to fuck yeah in 3 seconds.
-
07-13-2015, 05:27 PM #5
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Just did one on my buddy's lt1 rx7
-
07-13-2015, 08:08 PM #6
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
When I get it to my shop on the lift We may go for it. Thanks for the input
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
08-19-2015, 05:12 PM #7
InActive Member
- Status
- Offline
- Join Date
- Jan 2012
- Vehicle
- 1997 z28 383 stroker
- Location
- oklahoma city,ok
- Posts
- 2,859
Did yall get it ?
Originally Posted by waltsfastz
Smoke tires not drugs
-
08-21-2015, 01:56 PM #8
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Na, The guy didn't want to mess with it so neither did we.
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
08-21-2015, 06:46 PM #9
InActive Member
- Status
- Offline
- Join Date
- Jan 2012
- Vehicle
- 1997 z28 383 stroker
- Location
- oklahoma city,ok
- Posts
- 2,859
Well what the hell lol
Smoke tires not drugs
Reply With Quote
Bookmarks