I have these cables, What can I do to make it work(OBD1 95 connector)

[waltsfastz]

I have These, Cable used to work 10 years ago when I had a laptop with a serial port. Should it work with this USb adapter or is there an easier way? What do Ineed?

[popo8]

An adapter should work. I have one with my loaner laptop... it has usb and serial ports depending on what is being tuned and what cables are being tuned.
@Sahara54 has it now... im not sure if he is using the usb or serial ports.

[Sahara54]

On the sites cable; its OBDII plug to a serial and then a converter box (Moates) to the USB. I have a OBD1 plug direct to USB (ALDL) for my 94.
If you have the correct driver installed and it recognizes and communicates then use it.
ALDL cables sells the 95 plug to usb w/ driver for $56

[waltsfastz]

Driver for the USB converter? or something else. I downloaded that driver last night

[LDM]

If you can't get it to work Tunercat sells a USB upgrade kit for $60 that will work with your ALDL cable. I ended up having to replace a RS232 one I'd had for over 10 years that finally died on me last year. I didn't want to spend $120+ on a USB version that came with the ALDL connector that I didn't need.

[waltsfastz]

Ok, My converter won't connect to the PCM. I have been reading and I think I need one of these
http://www.amazon.com/dp/B005S72HHO/...&dra_ohs=24-48
does this look right? im haveing a time. I bought tuner cats and the Def file the other day, Should have went ahead and bought the cable as well and called it a day

[firebird_1995]

Depending on what chip set the cable is using, you may need to install an older version of the driver. I use the 2.08.30 driver.
http://www.ftdichip.com/Drivers/CDM/...0Certified.zip

[Black97]

hey man i literally have the same shit and was wondering what the world you did or if you have figured out how in the world to connect to the pcm I'm going racing this weekend and would really appreciate it if you told me what you had to do to get it to work.. Thanks!

[waltsfastz]

hey man i literally have the same shit and was wondering what the world you did or if you have figured out how in the world to connect to the pcm I'm going racing this weekend and would really appreciate it if you told me what you had to do to get it to work.. Thanks!

I havent yet. I downloaded the driver for this staples USb converor but it is no t transmiting or reciveing data from the PCM. I havent figured out anything yet. If you do however please share.