- Navigation
Results 1 to 3 of 3
Thread: How much N2O can I run?
-
06-12-2015, 11:59 AM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2013
- Vehicle
- 1994 Camaro z28
- Location
- College Station
- Posts
- 95
How much N2O can I run?
Hey everybody I'm about to fire up my 396 after Moe gets my PCM back from me. I want to know how much nitrous I can run without hurting a cylinder. Motor has .004 piston to cylinder clearance with the coating from PolyDyne and I'm running Speed Pro hellfire rings at a .0021 gap which is for moderate nitrous. Compression is 13:1 and I'll be running on 110. Pistons are SRP forged with tops and skirts coated. Callies stealth crank and H-beam rods. ARP bolts. What do y'all think?
I was personally planning on running on motor and then dyno on a 200 pill.
Sent from my iPhone using Tapatalk
-
06-12-2015, 01:11 PM #2
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
What's the top end look like
-
06-12-2015, 08:24 PM #3
LTX Master
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Troy, Tx
- Posts
- 942
200 will be no issue
1994 Formula, 396cid, AFR 227's, Single plane, and 2 of the big ones.
-
The Following User Says Thank You to Chopstix For This Post:
Reply With Quote
Bookmarks