- Navigation
Results 1 to 7 of 7
Thread: Guideplates
-
05-14-2015, 12:40 PM #1
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Guideplates
I know this has been beat to death. However i bought a set of Erson guideplates and they arent even close to lining up the rocker arms. I know a lot use trick flow #30400623-8. I found these Iskys that a lot of others are using, are these it?
http://www.summitracing.com/parts/is...FVU8gQodiXsAwA
any input? are the isky's $20 better and worth the extra hassle welding?
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
05-14-2015, 04:27 PM #2
Lurker
- Status
- Offline
- Join Date
- Feb 2011
- Location
- jackson mi
- Posts
- 1,207
@nightrain66
97 firehawk m6 with a forged long rod 355 stock heads and intake soon to be upgraded to LE 21* tfs heads and a big asscam , rpm built level 5 t56 trans s60 with 4.30 gears umi suspension walbro pump and hot wire kit and a spinning best 12.36 @ 114 crap 60 foot.
-
05-14-2015, 05:26 PM #3
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
I use the iskys. Get them where u want and weld them
-
05-14-2015, 08:25 PM #4
Lurker
- Status
- Offline
- Join Date
- Dec 2011
- Name
- Jonathan Englund
- Vehicle
- 1994 z28/1994 formula
- Location
- Nebraska
- Posts
- 549
i have the trickflows. They arent quite perfect but there real close
94' Z28 A4 black: turbo build in progress
94' Formula A4 red: 355, 11.5:1cr, LE 231/239 cam, comp promags, lpp's, Yank stall, 3:42's, Solomon tune
07' Impala A4: 180000 miles of stockness
-
05-15-2015, 09:05 AM #5
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Is that the correct part number in the link. and is that a whole set> i thought these things used to be $140 a set
Originally Posted by dawdaw
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
05-15-2015, 09:26 AM #6
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Yup those are it! I got mine from @96LT1355Z28 for a few bucks cheaper then that
-
05-15-2015, 03:23 PM #7
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Thanks, I got the iskys ordered
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
Reply With Quote
Bookmarks