what's some of yall's non lt1 powered cars and projects yall got going on

[1cleanSS]

i have a 97 ss daily and have other builds going on and just curious as to what else everyone on here is working on
here's my cars:
97 ss full exhaust
1966 427 corvette
1962 international harverster c120 "hell harvester" blown 392 gasser project

IMG_2029.JPGIMG_0057.JPGIMG_1007.JPGIMG_2365.JPG

[Ryan Stout]

Bearings and oil pump, 1991 Dodge stealth RT/TT. Buddy's car, but he wants to sell it cheap and I know a guy.....

Known the car for 10 years, he's taken good care of it. Has a built bottom end, he lost interest, put it back together, drove it for another 70k, and now it needs bearings, rattles when hot. Interior is almost shot but that can be fixed. Such a cool car IMO.

[Madman337]

As found.JPGThis 1980 Cobra Mustang started off as the youngest sons project but he lost interest so it is now the oldest sons project and this is how it looked after sitting in a field since 1997.


Cleaned up.JPGThis is how it looked after a bath, the interior is totally shot butr the car is solid and even though it sank in to the ground the car still has rust free floors ect.


(33) Mustang engine.jpgThis was my old 5 liter engine setup, everything will work for the older car and we are going to do a later model engine swap to it. I did give the LTX swap some consideration because I will have an extra complete A4 setup but with the smog nazias here it would not fly as easy as a later model 5 liter swap and my son has always wanted a Mustang like I used to have. I did tell him that in the next few years he will be getting the Z28 so he and my grandson can start on it as a father son project of their own. I also hope that with a better job to build a older car again thats big block chevy powered, or maybe a Vega with a nasty blown LT! in it.

[popo8]

MY ESCALADE needs to be lowered... thats it.

Sorry... all mine are LTX...

My camaro is "done" for now other than wanting to redo the exhaust...

The trans am will get the camaros y pipe all the way back to the end...its own set of LTs... 373s with TA diff coverthat are sitting in the garage. Small floor rust repair, new head unit, ac compressor...paint and tint.

The vette will be getting the lt1 that came out of the donor camaro... Carb'd and on the bottle for an extra 100... A diet... And proper suspension to make it more "drag-able."

LTXtech.com is my DRUG!

[SexyTransAm]

doin a lq4 in my 80 trans am. got a 9in with locker, mvb powerglide. and getting a 80mm turbo next

[SexyTransAm]

the turbo should be here any day. got a t6 bw s480. goin to build a stainless steel hot side and headers out at a buddys shop.

[jaysz2893]

we just finished the 99 audi a4 2.8 Quattro, we have am 87 trans am that we are going to put a l98 in, and we are deep in a 56 chevy 150 that we are making into a woody wagon.

[superspirit]

Well my current project is a camper hauler, got a 98 k3500 4x4, crew cab single wheel, with a 355 sporting dart ss heads, LT1 cam, GM 1.6 SA rockers and a TPI intake, shorty headers and stock exhaust. I pull a 32 ft cougar travel trailer up the mountain several times a year, hoping this will do the job better than the old tbi c1500 I had did.
this is what I haul.


these are the last pics of the project


its quite a bit farther along than this, just havent taken any recent pics.

[hokeplaya05]

planning on tearing into my daily over the summer...rebuilding the motor to a 355ci with a cam, ported heads, marine intake mani etc., also on the hunt for a whipple. either swapping to an nv4500 5 speed (looking for a donor atm) or rebuilding/upgrading the 4l60e. i already swapped a 3/4 ton 14 bolt into it, have a trutrac and new gears for it. also needs rust repair and respray

here is what she looks like now



also have a pair of vintage jetskis i am trying to get ready for the summer

82 kawasaki js550 standup


88 kawasaki x2