WTB 94 lt1 wiring harness

[beaver50]

I need a wiring harness for my 94 lt1.Let me know if you have one.

[waltsfastz]

What is wrong with yours? Id like to find an old harness to cut up and make it work on a dyno. May be interested(if you find one)BTW what part of KY are you from?

[Revolutions]

I have 1 from a 95 which is identical with one exception that being 1 additional wire in the trans harness for a solenoid that was added to the 4L60E in 95.
It appears you only need the engine harness so that is not applicable but thought you should know anyway.
$150.

[beaver50]

waltsfastz.Who ever had the car before me.had cut the harness up in a lot of place.then he took black mining tape and taped it up.It was a mess.it looked like somebody was in a hurry to got the engine out.And just cut all the plugs off.When I put the new engine in it.i set down and bunted them all up and used connectors.The red,blue and yellow ones and put it back together.Im getting ready to go threw my engine and do some big mods.So I figured I would get a good harness.if I get a good one.i well sale it or trade it or something if you want it.
Revolutions,Send me some pics of it.Is it into any place cut or tore apart ant place??

[SwampWS6]

I have a 97 harness with the PCM if interested

[Formula218]

i have one out of my '94 but it was modified before i got it, and i've taken a couple plugs to make a LS harness work in my '94. if you just need one for parts/plugs you can have this for super cheap.

[Revolutions]

Beaver I am at work right now will get pics to you asap. It is in perfect condition other than maybe a retention tab or 2. Will look it over carefully before taking pics so you see anything wrong.

[Sahara54]

I'll be swapping my A4 harness out this weekend for a M6 harness. I'll post up when it's out. Only thing that I fixed on it was the icm grounds and removed the oil level sensor wires.

[Revolutions]

Here a couple of pics of the harness. I looked it over and the only issues are map sensor retention tab is missing and the loom near the starter is split (pictured).
If you would like a close up of anything specific let me know.

[beaver50]

Im going to replace my harness.I fixed every place in it.But it has so many places I fixed.im affraid it well go down.When something I have goes down.Every time its away from home.Always some place were you cant find nothing.So every body posy what you have.Be cause im going to buy one.