Questions about a Zex Nitrous kit

**95camaro** · 10-30-2014, 07:31 PM

Hello all, I recently bought my 95 Camaro z28. It has 79,000 miles on the shell, with about 1000 on the entire drive train. I have a few Nitrous related questions, the first of which being what should I look for when buying a used kit? I'm going to look at a wet kit tomorrow, it is still installed in the car and the seller is going to show me it works before removing it. I am completely unfamiliar with nitrous kits, so what should I look for? He said it includes bottle, lines, warmer, window switch with solenoids, and extra solenoids for standard wet system. Does that sound right?
Also, how big of a shot can I spray? The motor has forged rods and pistons, but a stock crank. The heads and cam kit are advertised for 11.5:1 compression. I do plan on tuning the pcm when I install the nitrous.
I can provide specs on the tranny and rearend if needed, and the rear is a 10bolt but I'm thinking if I don't spray out of the whole I should be okay.
Thanks in advance!

**zooguy** · 10-30-2014, 07:56 PM

just make sure both noids click and your good ... get colder than stock plugs and pull some timing also when spraying run good gas and maybe toss in some race gas to help

**JCzNova** · 10-30-2014, 08:36 PM

Welcome to the forum. Stop on by the introductions section and tell us a little more about yourself and your ride.

http://ltxtech.com/forums/forumdispl...-Introductions

**95camaro** · 10-30-2014, 09:17 PM

Originally Posted by zooguy

just make sure both noids click and your good ... get colder than stock plugs and pull some timing also when spraying run good gas and maybe toss in some race gas to help

okay thanks. any tips for when I install?

Originally Posted by JCZNova

Welcome to the forum. Stop on by the introductions section and tell us a little more about yourself and your ride.

http://ltxtech.com/forums/forumdispl...-Introductions

thanks I just posted in there