- Navigation
Results 1 to 3 of 3
-
10-14-2014, 07:25 PM #1InActive Member
- Status
- Offline
- Join Date
- Aug 2014
- Name
- christopher
- Vehicle
- 1996 Camaro Z28
- Location
- Central Point, Oregon, United States
- Posts
- 146
1996 camaro running rough at times
Ok so I changed my oil the other day and with my luck the fuel pump ground wire came loose and I fixed it then for some reason when I tried to drive home my rpm's started going up and down rapidly and then i loss power and my car wanted to die. At times it would drop down to 0 rpm. When I pushed all the way on the gas it wants to go but the rpms again drop to 0 and it falls flat on its face. Then after I sprayed brake clean around the bottom of the opti it stopped doing what it was doing then drove fine but now it's starting it up again. I have replaced the distributor, coil, icm, water pump and plug wires this year. I haven't changed the plugs in like 2 years. And the fuel pump was changed. Could this be a opti problem? And when I rev I smell a somewhat odd odor and alot of gas
-
10-14-2014, 08:06 PM #2
Sorry to say it sounds like the opti check all the connection there could be corrosion in the opti harness or something is loose
forged 383,9.6:1,280xfi, trickflow heads,edlebrock lt4 intake,moser 12 bolt w/373
-
10-14-2014, 08:22 PM #3InActive Member
- Status
- Offline
- Join Date
- Aug 2014
- Name
- christopher
- Vehicle
- 1996 Camaro Z28
- Location
- Central Point, Oregon, United States
- Posts
- 146
Yeah I figured :/ I did replace the fuel filter a long time ago so could it be that aslo? And there is the opti connector on top of the intake manifold is there one on the bottom?
Reply With Quote

Bookmarks