question about the injectors

[timopajala]

Hi! i bought these injectors for my cammed camaro, denso f2le-b2a. Do they work on 43,5psi or less? My current promm is burnet for those injectors. I also have holley adjustable fpr in my car so i can dropp or lift the pressure just need to know how they are ment to work and so i won´t damage my ecm with the. Some one told me that they have different ohm ratings than the lt1 has??

[MoeHorsePower]

Hi! i bought these injectors for my cammed camaro, denso f2le-b2a. Do they work on 43,5psi or less? My current promm is burnet for those injectors. I also have holley adjustable fpr in my car so i can dropp or lift the pressure just need to know how they are ment to work and so i won´t damage my ecm with the. Some one told me that they have different ohm ratings than the lt1 has??

What?

[popo8]

He is from finland...I believe its a language barrier.

I think what he is saying is he has big injectors... the ls kind that are opposite to our lt kind... I think u need a converter to use them.

I think thats what he meant.

LTXtech.com is my Drug...

[timopajala]

well i ment that i bought these injectors for my car denso f2le-b2a. The seller assumed that they fit directly to lt1 engine and work normally but i still have little doubts about that. Some other guy sayd that they might use different ohm reading than the originall lt1 injectors and can cause problems to the ecm, if someone has info on that would be really helpfull.

[Injuneer]

The Denso part # search indicates they are 24 #/HR injectors, for a Ford application. Also known as "blue top". The appear to be flow rated at 43.5psi, and have a resistance of 14.5 ohms. This is the info from an ebay listing:

Genuine Denso/Ford fuel injectors--p/n F2LE-B2A - Blue Top

Injector Body Design: EV1 - metal/plastic
Flow rate: 24lbs/hr at 43.5 psi, (3 BAR)
Length: 3 inches, 74 mm
Diameter: 24 mm
O-rings: Viton, top and bottom, 14 mm
Resistance: 14.5 Ohms
Filtered with a 4-hole disc fuel delivery nozzle.
(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Injector Body Design: EV1 - metal/plastic
Flow Rate: 24 lbs/hr at 43.5psi (3 BAR)
Length: 3 inches/74mm
Diameter: 24mm
O-Rings: Viton top and bottom, 14mm
Resistance 14.5 ohms



They will not damage a 1993 ECM. And you indicate the chip has been turned for them.

Retyped and still will not show up clearly - damned if I can figure out how to copy/paste into this white on black format. Never works. Super irritating.

[blkchevyz]

from what i googled those are just 24# ford blue tops. you should be good.

[blkchevyz]

yeah what he said lol

[timopajala]

thank you both for the info i needed!!! i´ll should be fine then