flp headers and custom 3 inch duals

[blkchevyz]

coated, but like most the collector coating chipped off.
headers are 1 3/4 with a 3 inch primary. the duals are 3 inch, h-pipe with flowmaster 1 chamber race mufflers that dump at the axle slightly angled out. sounded damn good to me. i ran the same time with this setup that i did with dual cutouts right after the collectors so its pretty free flowing. fit my 94 m6 with the old style spohn torque arm that mounted at the cross brace. with the flp if you have a factory oil cooler you will have to remove it. besides that the only modification you need is too install 2 small hangers to support the mufflers.
going turbo so dont need it anymore.


headerduals.jpgheadersduals2.jpg
pickup or maybe meeting up only... not worth shipping. would like to get 600 obo.
parts i'm looking for and could work out a trade... good camaro front and/or rear bumper. aftermarket hood, nice seats, 80ish lb injectors, adjustable control arms, shocks...

also have 2 flow tech 2.5 inch cut outs like to get 15 per plus shipping.

[blkchevyz]

still for sale, take 450 for all of it, or sell just the headers for 250.

[blkchevyz]

still got this stuff if anyone wants to make an offer or trade.

[GreenZ96]

Are the collectors 3 bolt

Sent from my HTC6435LVW using Tapatalk

[Flyinz]

I thought I a guy on CZ28, looking for FLP's.

[blkchevyz]

collectors are v flange.

i'll take a look on cz28 thanks.

[blkchevyz]

i'll separate this stuff, so if anyone is interested in the header and or the mufflers. let me know.

[blkchevyz]

exhaust is sold, just have the headers left.