Will the cam work with a P600B?

**shownomercy** · 05-01-2014, 06:32 AM

That cam has gotten around alright..

I would swap in something less aggressive so that you are not peaking at a high RPM and boost on a stock motor.

**MoeHorsePower** · 05-01-2014, 06:54 AM

Originally Posted by TubbyFormy

@Ltconvert has a LE2 setup on a stock bottom end with a Bullett .592/.592 228/234 cam on a 110lsa. Question is, will the car really run well with this cam? Would it be worth swapping the cam with the p600b on a stock bottom end?

Thanks in advance, forced induction is very new to us.

Its probably around 10* too much, and lower lift would help, but will it work?, Yes...Get you max performance out of the setup, probably not..