- Navigation
Results 1 to 5 of 5
-
12-01-2013, 02:22 PM #1
Lurker
- Status
- Offline
- Join Date
- Sep 2008
- Location
- OH
- Posts
- 167
ARP 12 point Head Stud Part number
Ok Im looking to install arp 12 point head studs on my lt1 this winter and not sure on the correct part number? Im running the big 1.580 valve springs to have to run a 12 point on some bolts. Can anyone shoot me a correct part number? Thanks
-
12-01-2013, 02:32 PM #2
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
12-01-2013, 03:08 PM #3
Lurker
- Status
- Offline
- Join Date
- Nov 2013
- Name
- Guillaume
- Vehicle
- 95 Caprice & 89 RX7
- Location
- Montreal, Qc
- Posts
- 334
http://www.summitracing.com/int/part...4301/overview/
I used the kit for a regular gen1 SBC and it works fine.
Last edited by GuillaumeC; 12-01-2013 at 03:20 PM.
1989 Mazda RX7 Turbo II, 357ci LT1, AI TFS CNC heads, Garrett GTX4708R, Ford 8.8" SAS, TH400. (Current project)
1995 Chevy Caprice, Twin turbo 357ci LT1, 9.96 @ 141.2 mph (sold)
-
12-01-2013, 05:05 PM #4
Lurker
- Status
- Offline
- Join Date
- Sep 2008
- Location
- OH
- Posts
- 167
Holy shit they are expensive!! ok thanks for the part #
-
12-01-2013, 10:11 PM #5
10 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
234-4301 for standard 12pt and 234-4601 for 12pt undercut (shorter studs manufactured to equalize stretch of longer studs) let me know if you would like me to PM prices.
-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
Reply With Quote
Bookmarks