- Navigation
Results 1 to 6 of 6
Thread: BMR SF and Trak-Pak Torque arm
-
09-15-2013, 09:01 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jun 2009
- Location
- Naples, FL
- Posts
- 707
BMR SF and Trak-Pak Torque arm
Anyone using this combo? How's it launch?
96 Z LTx. 396 Forged Eagle BE, AFR195s, CR 12.5:1 Comp Ultra-Pro Mag1.6 RRs, Lt-4 Intake, 42lb FI, 58mm TB, Comp 292XFI Cam, Kook LTs, PerformaBuilt Lvl-3, SS 3600, 4" DS, Spooled Strange D-60 w/5.13s, BMR K-mem & A-arms, Hotchkis out back, Mazeire, MSD Digi-6 , Nano-N2O, 75 shot: 7.28 @ 95.7 1.6 60' - New Build: NA-SF 7.4 1.6 60' 93 Mph
-
09-16-2013, 06:03 AM #2
InActive Member
- Status
- Offline
- Join Date
- Jun 2009
- Location
- Naples, FL
- Posts
- 707
No one is runnin' the Trak-Pak? Seriously?
-
09-16-2013, 08:45 AM #3
Lurker
- Status
- Offline
- Join Date
- Jun 2012
- Posts
- 1,267
No sir, daw daw has a trac pak. Ill be switching to their exteme setup during this build. I know someone that has the extreme already, but has had issues every time at the track. I believe @gump has the exfreme as well as a few others. Basically the same and I'm sure it prob launches just fine.
Making you silky smooth...Last edited by ZOHAN; 09-16-2013 at 08:47 AM.
-
09-16-2013, 08:49 AM #4
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Its a good arm. You can put there long cross member for the torque arm in which welds into.the sfc or there short cross member. It works good as would most any other short arm.would as long as your other suspension pieces are up to par
-
09-16-2013, 10:54 AM #5
LTX Master
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Troy, Tx
- Posts
- 942
I have the trak-pak tq arm...1.32 60' off a foot brake is my best so far
1994 Formula, 396cid, AFR 227's, Single plane, and 2 of the big ones.
-
09-16-2013, 06:21 PM #6
InActive Member
- Status
- Offline
- Join Date
- Jun 2009
- Location
- Naples, FL
- Posts
- 707
LOL! THAT'll do…
Originally Posted by Chopstix
Thanks for the feed back, fellas… We've got the SF and TP in stock out in the shop… so now it looks like we're in the market for a welder.
Reply With Quote
Bookmarks