- Navigation
Results 1 to 10 of 28
-
09-05-2013, 11:57 AM #1
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Posts
- 404
F/S weiseco forged pistons 8:1 200.00 obo
these are a std bore where in my SS when i bought it. in good shape, id reuse them again if i had another motor to use them in. ill get pics asap, they are out at my buddies shop. when i pulled the motor for the stroker the car ran ok as far as pistons... the bad motor was a couple failed bearings. like i said the slugs are in good shape. im pretty sure the pin is still with them too.
1997 SS- 30th #80 SS #455 383, F1A, nitrous
http://www.gmhightechperformance.com...ler_ghtp_1203/
1995 Z28- 14:1, 355, Beer can on 4 wheels.
-
09-09-2013, 10:09 PM #2InActive Member
- Status
- Offline
- Join Date
- Oct 2012
- Vehicle
- 92 camaro rs ,93 camaro z28
- Location
- delaware laurel
- Posts
- 415
got any pix?
-
09-10-2013, 01:41 AM #3
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Posts
- 404
I'm heading there today to finish up the 14:1 lt1 so i will snap some pics.
-
09-10-2013, 07:22 PM #4InActive Member
- Status
- Offline
- Join Date
- Oct 2012
- Vehicle
- 92 camaro rs ,93 camaro z28
- Location
- delaware laurel
- Posts
- 415
any yet my friend?
-
09-11-2013, 12:10 AM #5
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Posts
- 404
GF stopped over and i got distracted LOL i asked my buddy to send me some pics as they are at his house. ill send him a message and tell him to get on it!
1997 SS- 30th #80 SS #455 383, F1A, nitrous
http://www.gmhightechperformance.com...ler_ghtp_1203/
1995 Z28- 14:1, 355, Beer can on 4 wheels.
-
09-11-2013, 12:34 AM #6
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Posts
- 404


1997 SS- 30th #80 SS #455 383, F1A, nitrous
http://www.gmhightechperformance.com...ler_ghtp_1203/
1995 Z28- 14:1, 355, Beer can on 4 wheels.
-
09-11-2013, 12:36 AM #7
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Posts
- 404
these are older pics before i had the rods removed. they are in pretty good shape, but they have been ran.
1997 SS- 30th #80 SS #455 383, F1A, nitrous
http://www.gmhightechperformance.com...ler_ghtp_1203/
1995 Z28- 14:1, 355, Beer can on 4 wheels.
-
09-11-2013, 03:58 PM #8InActive Member
- Status
- Offline
- Join Date
- Oct 2012
- Vehicle
- 92 camaro rs ,93 camaro z28
- Location
- delaware laurel
- Posts
- 415
ok if you could get a little clear ones of the side skerts and the tops the flash kinda washed it out but im very into it
-
09-11-2013, 04:28 PM #9Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
Are those valve marks?
'72 Nova "HadeSS"
-
09-11-2013, 07:43 PM #10
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Posts
- 404
no, they are a goofy valve relief. every piston has it, the car never dropped a valve or broke a timing set so there was never valve contact to the pistons, hell the same LT4 heads are on my 383... but yeah ill get some better pics for ya.
1997 SS- 30th #80 SS #455 383, F1A, nitrous
http://www.gmhightechperformance.com...ler_ghtp_1203/
1995 Z28- 14:1, 355, Beer can on 4 wheels.
Reply With Quote

Bookmarks