- Navigation
Results 1 to 10 of 15
-
08-11-2013, 10:01 PM #1
InActive Member
- Status
- Offline
- Join Date
- Mar 2013
- Posts
- 98
Complete T-56 with Conversion Parts
Hey everyone. I'm selling my complete T-56 with all the necessary conversion parts for 93-97 F-body's. The trans came from a 97 and has 143k miles on it and was used in a daily driver with no mods. I'm including all the parts necessary for the 6 speed conversion.
*T-56 with Bellhousing
*Complete Pedal Assembly
*Master/Slave Cylinder
*Crossmember
*Re-Surfaced GM Flywheel
I do have the upper 6 speed center console but is a different style than the 93-96 consoles since its from a 97.
I'll take $900 for everything listed above. I will ship too.
I also have a Spec 2+ Clutch/Pressure Plate kit available and a new GM slave/master cylinder as well. If interested, I can give you prices on those. I can be contacted at 815-291-4833 (Call/Text) or PM me on here. I can provide pics too. Thanks, Jason.Last edited by race21; 08-12-2013 at 08:11 AM.
-
08-11-2013, 10:04 PM #2
"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
@dzltek
Just an LTXtech addict
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
08-12-2013, 07:50 PM #3
Administrator
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,693
Supporting Member
im interested
LTX Hoarder
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.64 @ 139.4mph on a 88 jet
1994 Camaro Vert - SBE LE1 Summit 8802 Cam - The Cruiser
1993 Camaro Z28 - 355 TC78 Turbo T56 - part out? finish?
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ P600B / CPT Ultra Pro Race 4L60E/Holley Terminator EFI/little huff of spray
10.16 @ 138mph. Shooting for 9.99 for Frank/Gail Cahall!
-
08-12-2013, 07:58 PM #4
LTXTech Sponsor
- Status
- Offline
- Join Date
- Nov 2010
- Vehicle
- 1992 convertible camaro
- Location
- Florida, United States
- Posts
- 631
Next in line for a Shipping quote to 34288
Id be interested in my the 97 6 spd top console also if Tubby takes the trans , etc..'92 vert with 383 LT1 | 78mm turbonetics turbo, Tial 50mm BOV , Tial 44mm waste gate | Ported heads | Intake Drilled for MSD Pro Billet Distrib|Callies crank & rods | JE Pistons | T56 | spohon suspention.
'97 Camaro LT1 /T56 | Longtubes | O/R Y pipe | Magnaflow cat back | K&N CAI | CSR EWP | Dynoed 292rwhp /321 rwtq Best et. 13.1@107 w/ 2.07 Sixty ft.
~Custom Made Billet Emblems | Thermal ,Ceramic & Powder Coatings ,etc.. Just PM me~
-
The Following User Says Thank You to FSTFBDY For This Post:
-
08-12-2013, 09:37 PM #5
Lurker
- Status
- Offline
- Join Date
- Jul 2012
- Vehicle
- 95 Z28 6 speed
- Location
- Springfield Tn
- Posts
- 479
No money now @popo8. Appreciate the looking out though.
HOWEVER!!!! If op is interested in a brand new turbo 400 setup with EVERYTHING thaen I'd be able to make trade. I do have a little cash if interested, or I will deliver and pick up!!!
-
The Following User Says Thank You to dzltek For This Post:
-
08-12-2013, 10:19 PM #6
Administrator
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,693
Supporting Member
Location
LTX Hoarder
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.64 @ 139.4mph on a 88 jet
1994 Camaro Vert - SBE LE1 Summit 8802 Cam - The Cruiser
1993 Camaro Z28 - 355 TC78 Turbo T56 - part out? finish?
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ P600B / CPT Ultra Pro Race 4L60E/Holley Terminator EFI/little huff of spray
10.16 @ 138mph. Shooting for 9.99 for Frank/Gail Cahall!
-
08-12-2013, 10:44 PM #7
InActive Member
- Status
- Offline
- Join Date
- Mar 2013
- Posts
- 98
Originally Posted by popo8
61032. About 2 hours west of Chicago. Originally Posted by TubbyZ28
-
08-12-2013, 10:49 PM #8
InActive Member
- Status
- Offline
- Join Date
- Mar 2013
- Posts
- 98
I'm also including the flywheel bolts, pressure plate bolts, and trans to engine bolts. If there is any other fasteners or anything else the buyer can think they might need let me know. The clutch release fork is also included.
I have some pics of the trans, but not sure how to post them yet. Thanks, Jason
-
08-13-2013, 10:51 AM #9
Lurker
- Status
- Offline
- Join Date
- Jul 2012
- Vehicle
- 95 Z28 6 speed
- Location
- Springfield Tn
- Posts
- 479
I'm willing to travel if you want to trade. If not i'm out.
-
08-13-2013, 11:13 AM #10
InActive Member
- Status
- Offline
- Join Date
- Mar 2013
- Posts
- 98
Sorry. I'm not looking to trade. Thanks anyways. Originally Posted by dzltek
Bookmarks