- Navigation
Results 1 to 5 of 5
-
07-21-2013, 08:19 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jun 2009
- Location
- IL
- Posts
- 98
WTB 1993 ECM #16159278/#88999183 or equivalent
As the title says, looking for an ECM for a '93 Z. Let me kow what you guys have and what you're looking to get out of it.
Thanks in advance,
Chris93 Z28, A4 Full tubular suspension, LT's, CAI, EWP 13.1@102
converter and gears before spring.....hoping for 12.5's
-
07-21-2013, 08:56 PM #2
LTXTech Sponsor
- Status
- Offline
- Join Date
- Nov 2010
- Vehicle
- 1992 convertible camaro
- Location
- Florida, United States
- Posts
- 631
a buddy of mine has a wrecked '93 he is looking to scrap. Let me ask if he will pull the ecm out of it for ya.
Shoot me an email with a offer to give him. FSTFBDY@GMAIL.COM I will ask him in the AM.
Had 140k before it was parked. Front end wreck. Guy from work is gonna scrap the car itself. anything else you might need?
Interior is shot.
Engine , trans , rear end all good.
What's it worth ? I'll pass the word on.
If I had room to part it out. Id buy it myself butI can't use anything on my 97 so not worth the it to me.'92 vert with 383 LT1 | 78mm turbonetics turbo, Tial 50mm BOV , Tial 44mm waste gate | Ported heads | Intake Drilled for MSD Pro Billet Distrib|Callies crank & rods | JE Pistons | T56 | spohon suspention.
'97 Camaro LT1 /T56 | Longtubes | O/R Y pipe | Magnaflow cat back | K&N CAI | CSR EWP | Dynoed 292rwhp /321 rwtq Best et. 13.1@107 w/ 2.07 Sixty ft.
~Custom Made Billet Emblems | Thermal ,Ceramic & Powder Coatings ,etc.. Just PM me~
-
07-22-2013, 08:51 AM #3
InActive Member
- Status
- Offline
- Join Date
- Jun 2009
- Location
- IL
- Posts
- 98
I don't even know what to offer. Lol. What's it worth in the 15 min it might take to pull it out? $40 plus the ride? Lmk what he says.
-
07-22-2013, 06:42 PM #4
LTXTech Sponsor
- Status
- Offline
- Join Date
- Nov 2010
- Vehicle
- 1992 convertible camaro
- Location
- Florida, United States
- Posts
- 631
Sorry to late. Complete car got shipped off to the scraper today. He got $475 for a complete running / wrecked 93 z.
Sad day for a camaro.
'92 vert with 383 LT1 | 78mm turbonetics turbo, Tial 50mm BOV , Tial 44mm waste gate | Ported heads | Intake Drilled for MSD Pro Billet Distrib|Callies crank & rods | JE Pistons | T56 | spohon suspention.
'97 Camaro LT1 /T56 | Longtubes | O/R Y pipe | Magnaflow cat back | K&N CAI | CSR EWP | Dynoed 292rwhp /321 rwtq Best et. 13.1@107 w/ 2.07 Sixty ft.
~Custom Made Billet Emblems | Thermal ,Ceramic & Powder Coatings ,etc.. Just PM me~
-
07-22-2013, 10:38 PM #5
InActive Member
- Status
- Offline
- Join Date
- Jun 2009
- Location
- IL
- Posts
- 98
That's just a shame. Oh well I guess. Thanks though!
Reply With Quote
Bookmarks