BACON BITES!

[NuckinFutz93]

i have to get some firewood from outside while my dad dusts and vacuums then we should leave in about an hour

Ben, Take some good pics of it! I really like it!

[meissen]

When they say to only hand tighten a PVC fitting -- only hand tighten. Quick run to the local hardware shop to get a new braided line and the toilet is fixed again.

[NuckinFutz93]

When they say to only hand tighten a PVC fitting -- only hand tighten. Quick run to the local hardware shop to get a new braided line and the toilet is fixed again.

Sounds like you were in a shity situation! LOL

[30thSSclone]

i have to get some firewood from outside while my dad dusts and vacuums then we should leave in about an hour

Ben, Take some good pics of it! I really like it!

ok, plus my dad just told me that i dont have to get another car, he will let me do the work I've wanted to do on my car

[meissen]

Yes, yes I was. I found a $20 kit from Lowes which replaces all the guts in the bowl of the tank but then I had a leak at the supply line. Tried to add a new rubber gasket and then put it back together but alas overtightened and cracked the PVC nut.

[CamaroZGuy]

sleeping on my couch was not a smart choice......

[NuckinFutz93]

ok, plus my dad just told me that i dont have to get another car, he will let me do the work I've wanted to do on my car

Take it from somebody that has done and raced a Vert, you'll come out cheaper buying the 93. LOL Just keep the 97 for a cruiser/show car.

[30thSSclone]

ok, plus my dad just told me that i dont have to get another car, he will let me do the work I've wanted to do on my car

Take it from somebody that has done and raced a Vert, you'll come out cheaper buying the 93. LOL Just keep the 97 for a cruiser/show car.

thats what i wanted to do, but he is going to let me just do a H/C/I LT1 with gears and a stall....im down for that. I know it probably will not be anything super fast, but it will be fun and i can always build a real racrcar at a later date

[NuckinFutz93]

Yes, yes I was. I found a $20 kit from Lowes which replaces all the guts in the bowl of the tank but then I had a leak at the supply line. Tried to add a new rubber gasket and then put it back together but alas overtightened and cracked the PVC nut.

First, I am not good at or really know anything about home repair, I did what you did to the toilet in my 3rd floor loft. After making the mistake you did, I got it all fixed and the leaks stopped, then dropped the tank top and busted the tank. I just shut off the water and shut the door. LOL

[NuckinFutz93]

thats what i wanted to do, but he is going to let me just do a H/C/I LT1 with gears and a stall....im down for that. I know it probably will not be anything super fast, but it will be fun and i can always build a real racrcar at a later date

I'm talking about the flex. Before you do any of the above, get you some sudframe connectors and other chassis braces. I ended up junking and parting out my 96, cause the top would no longer latch.