- Navigation
Results 1 to 4 of 4
Thread: sbc bearings same as lt1?
-
02-07-2013, 12:16 AM #1
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Location
- Overland Park, KS
- Posts
- 176
sbc bearings same as lt1?
getting ready to order new bearings for my fresh crank. can i run sbc bearings in my lt1? arent they the same?
aint nuthin but a 1995 slowmaro.... that thumps a lil bit
-
02-07-2013, 06:03 AM #2
LT1-less
- Status
- Offline
- Join Date
- May 2010
- Location
- Stafford, VA
- Posts
- 612
I believe they are, but I would double check. A simple call to the Summit or Jegs would give you the specifics. You can also look it up by finding bearings for the LT1 on their pages and seeing what they actually fit (there's a tab on there for application). A quick look on Summit shows all three (rod/crank/cam) utilize the same bearings. Double check before you buy something, though.
94 Z28 LT1 M6 - SOLD
-
02-07-2013, 09:09 AM #3
9 Second N/A Club
- Status
- Offline
- Join Date
- Mar 2010
- Location
- Rhode Island
- Posts
- 486
they are the same........cb663 is the prefix for clevite rod bearings ms909 is the prefix for the mains..........with aftermarket chamfered cranks make sure you run a narrowed bearing such as a cb663hn (add an x to the end for .001 under)
good luck
95 LTx Z28 Quasar Blue---NA 385 c.i. Advanced Induciton HCI, TH350, #3290-- 9.77 @ 138.4
2010 & 2011 LTX Shootout Modified Naturally Aspirated Champion
2012 LTX Shootout Modified Naturally Aspirated Top Qualifier and Runner Up---LTX Shootout MOD NA Top ET Record Holder
-
02-07-2013, 03:46 PM #4
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Location
- Overland Park, KS
- Posts
- 176
perfect! then i have a set of bearings on the way! thanks guys!
aint nuthin but a 1995 slowmaro.... that thumps a lil bit
Reply With Quote
Bookmarks