New member from Md.

[popo8]

That thing should be out cruising the streets man. Why no interest in tagging it?

[LT1 Formula]

That thing should be out cruising the streets man. Why no interest in tagging it?

I spend most of my free time riding and racing my bike at Summit Point Raceway. Iam gonna tag it this summer so I can drive to the local hot rod spots.

[LT1 Formula]

I posted a complete mod list on here but it didnt take it. Was it too long?

[popo8]

1995 Lingenfelter Firebird 383:
LT1 Block with four bolt mains
11.2:1 compression
Lunati Forged Steel Crank
Oliver Billet Steel 5.85" Rods
JE Forged Pistons
Joe Overton/Erson custom hydraulic roller cam 226/234 @ .050 .568" lift int/exh
Aluminum LT1 Heads CNC & Hand Ported by LPE in 1995 re-ported by E.B. porting in 2005
Manley Valves 2.00" int 1.56" exh
Comp Cams #977 Double Springs with Titanium retainers
Comp Cams Stainless Steel 1.6 Roller Rockers
Hand Ported/Blended Intake
Accel 30 lb Injectors & Accel Regulator
LPE/Accel 58 mm Throttle Body-Port Matched
MSD OptiSpark Distributor
MSD cap and rotor
MSD 6A Ignition Box, Taylor Wires, NGK TR-55s
Meziere Electric Water pump
Lingenfelter Cold Air Intake with K&N Filter
UMI EGR Block-off Plates
ASP 23% Underdrive Pulley/Balancer Combo
Moroso LT1 Stroker Oil Pan
Melling High Volume Oil pump
Kooks Stepped 1 3/4 - 1 7/8" Stainless Headers
Custom Stainless 3" True Duals
Billet 3" race mufflers
RPM Transmissions Level 5 4L65E Trans
Vigilante 9.5" Lock-up Converter 4400 Stall
Strange 12 Bolt with 33 Splined Axles
Richmond Spool with 4.10 Gears
Greg Weld/Race Star Industries 15X4 / 15X10
165/R15 fronts MT 325/50/15 Drag radials rear
6 Point Chrome moly roll bar
RCI Platinum Series Harness
Spohn Lower Control Arms with rod ends
Spohn LCA Relocation Brackets
Spohn Adjustable Rod Ended Panhard Bar
Hotchkis Weld-in Sub Frame Connectors
Spohn Torque Arm with 2 Drive shaft loops
Spohn Polyurethane Trans Mount
Spohn Pro Series Rear Sway Bar
QA1 R Series shocks/ 275 Lb Springs - Front
QA1 12 Way Adjustable - Rear
Polyurethane Motor Mounts
3" Steel Driveshaft
SLP Line Lock
Hardwood Ram Air Style Fiberglass Hood

[popo8]

Im wondering why there is an unmarked in front of your driveway.

[Badhawk]

I have cut 1.48 sixty but still only 11.20s. Do you think I have the MPH to go 10s

Here are a few of those slips I was talking about.

[LT1 Formula]

Im wondering why there is an unmarked in front of your driveway.

Only trained eyes like yours would pick up on that lol. Iam popo too.

[popo8]

Only trained eyes like yours would pick up on that lol. Iam popo too.

lol... for real?


Larry (Popo8) Co-owner
LTXtech.com

[popo8]

I spend most of my free time riding and racing my bike at Summit Point Raceway. Iam gonna tag it this summer so I can drive to the local hot rod spots.

i also used to race a bike....

i went straight...but what a rush...




ignore the photoshop please


Larry (Popo8) Co-owner
LTXtech.com

[LT1 Formula]

Badhawk what rear end gears where you running and what was your race weight? Also for some reason even when I cut 1.4X 60ft my 1/8 mile is only 7.1
Iam now having problems on the top end. I lost 10 mph in trap speed so Iam having new valve springs installed.