- Navigation
Results 11 to 15 of 15
Thread: Sizing intercooler piping
-
01-18-2013, 06:23 AM #11
Xtreme Member
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Brian DeLuca
- Vehicle
- 1997 Trans Am WS6
- Location
- Piscataway, NJ
- Posts
- 1,297
yes they refer to core thickness. Mine was 2.5" for the twins and now it's 3" through a single FMIC.
Originally Posted by firebird_1995
97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
17 Corvette Z06 - 11.05 @ 125
17 GMC Sierra Denali Dmax
-
01-18-2013, 03:22 PM #12
Xtreme Member
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 5,680
Mine is a 4" core, go big. Originally Posted by blackbirdws6
-
01-18-2013, 09:26 PM #13
Xtreme Member
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Brian DeLuca
- Vehicle
- 1997 Trans Am WS6
- Location
- Piscataway, NJ
- Posts
- 1,297
Agreed. Mine is a 4" core for my FMIC. Seems to work well.
97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
17 Corvette Z06 - 11.05 @ 125
17 GMC Sierra Denali Dmax
-
01-18-2013, 09:31 PM #14
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
What size piping are you running on these intercoolers?
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
01-18-2013, 09:48 PM #15
Xtreme Member
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 5,680
3 inch cold side
Reply With Quote
Bookmarks