Mod N/A Head research

[Badhawk]

Ok, I have been looking and researching for a while now on which head to buy it's been a tuff choice and I'm really still undecided. I'm looking to move up in class at the shootout and need some more power. I think I could squeeze another couple tenths out of mine but that's about it. I have been looking at the Airwolf 220's and the Pro-Filer's 227's also Rons Porting service does several nice heads. There is also AFR to consider but I'm leaning toward the air wolfs. I know Mike V and Frank are running AI stuff I think Joel is AFR if I remember. All the above that I mentioned talk a good game so it's time to make a decision.

Open for discussion, thoughts lets here it.

[Dave357LT1]

What about Brodix Track1x KC T1 227 (CNC Ported) ?
If you order them they will convert them
What heads do you have now?

[Badhawk]

What about Brodix Track1x KC T1 227 (CNC Ported) ?
If you order them they will convert them
What heads do you have now?

Those are one of the heads I was looking at by Rons' Porting service they are nice to. I'm currently running Brodix track 1's.

[quik95lt1]

buy my heads and intake so i can stomp you chicago boys back into the stone age

[Badhawk]

buy my heads and intake so i can stomp you chicago boys back into the stone age

Wow Mike, I thought we were cool What if I said I was from Brooklyn then would you tell me what you thoughts. The problem is our small bore so I don't want to run a valve any larger than a 2.08 intake and most of the big heads are running a 2.100 or larger valve to put out those big flow numbers. I have Spoken with Chad Speier and Bryce Mulvey about doing one of their heads with a 2.08 both said it won't be a problem it just won't flow obviously what the larger valve would.

[quik95lt1]

Wow Mike, I thought we were cool What if I said I was from Brooklyn then would you tell me what you thoughts. The problem is our small bore so I don't want to run a valve any larger than a 2.08 intake and most of the big heads are running a 2.100 or larger valve to put out those big flow numbers. I have Spoken with Chad Speier and Bryce Mulvey about doing one of their heads with a 2.08 both said it won't be a problem it just won't flow obviously what the larger valve would.

we are cool im just playin

[BIG CAT]

another few to think about. all pro's or a ported set of profiler 210's

http://www.racingjunk.com/Heads/2718...TITANIUM-.html

[Badhawk]

another few to think about. all pro's or a ported set of profiler 210's

http://www.racingjunk.com/Heads/2718...TITANIUM-.html

Thanks Big Cat, I'm checking out all of them just not going to run a valve bigger than a 2.08

[BIG CAT]

Thanks Big Cat, I'm checking out all of them just not going to run a valve bigger than a 2.08

its only .002" bigger.

[Badhawk]

its only .002" bigger.

Ha ha, that's probably alright for your beast but a little much for my little N/A setup.