- Navigation
Results 1 to 5 of 5
-
11-19-2008, 05:27 PM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- DFW Tx
- Posts
- 181
Oil sending unit for a single plane
What are you single plane guys using for an oil sending unit? Can you keep the stock gauge?
7.10ET 88mph
1/8th (old setup)
-
11-19-2008, 05:37 PM #2
Pr0jekt Turb0?
- Status
- Online
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,629
uhm... isn't the oil pressure sending unit in the side of the block...?
-
11-19-2008, 06:23 PM #3
Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
Side of the block above the filter or rear upper rail on the block. Manifold has nada to do with the OPS.
Originally Posted by Z28pr0jekt
Originally Posted by Ryan Stout
-
11-19-2008, 06:24 PM #4
8 second club
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Austin Tx
- Posts
- 1,125
Yes you can keep the stock gauge. Yes you can keep the stock sending unit. The single plane intakes will not interfere with the sending unit.
8.453 @ 163.58 mph (best mph 164.27)
MAY 2011 cover/feature GMHTP......Jan 2008 cover/feature Camaro Performers
2009,2010,2011,2015 LTX SHOOTOUT OUTLAW CHAMPION
Current LT1 N2O record holder (Sept 5 2015)
-
11-20-2008, 12:39 PM #5
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- DFW Tx
- Posts
- 181
Thanks guys...Im putting together my shortblock and it dawned on me that I might need a diff sending unit. Then later saw it plugs directly into the block. It was one of those V8 (smack on the forehead) moments..ha.
7.10ET 88mph 1/8th (old setup)
Reply With Quote
Bookmarks