- Navigation
Results 1 to 5 of 5
Thread: Rx Catch can LT1
-
08-10-2012, 09:54 PM #1
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Location
- Rochester, mi
- Posts
- 24
Rx Catch can LT1
After Hooking up the rx catch can does this look right? The center of the can is the inlet coming from front of the intake. and the other tube(outlet) is going to the pcv.
Last edited by Klrz28ss; 08-11-2012 at 06:56 PM.
383 LT4 M6 Solid Roller
-
08-11-2012, 01:46 PM #2
InActive Member
- Status
- Offline
- Join Date
- Nov 2010
- Location
- SoFla
- Posts
- 1,098
I think you may have it backwards. I think the cans inlet should be connected to the PCV valve. And the outlet to the intake. The air flows from the PCV valve into the intake.
Last edited by 95ImpySS; 08-11-2012 at 01:49 PM.
95 Impala SS Clone
-
08-11-2012, 02:12 PM #3
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Location
- Rochester, mi
- Posts
- 24
The pcv sucks from the front of the manifold and up into the pcv valve. The instructions are not very clear. That is why I a posting this question. The outlet only flows air out one way making me believe this is the correct way for air to go into the pcv valve.
Last edited by Klrz28ss; 08-11-2012 at 02:14 PM.
383 LT4 M6 Solid Roller
-
08-11-2012, 02:57 PM #4
Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
You've got that backwards. Air comes from the crankcase through the pcv valve into the inlet under the TB. So with the catch can, you want the PCV to the Inlet on the catch can, exit out to the port under the TB.
Originally Posted by Klrz28ss
-
08-11-2012, 06:48 PM #5
InActive Member
- Status
- Offline
- Join Date
- Aug 2012
- Location
- Rochester, mi
- Posts
- 24
Thanks guys!
383 LT4 M6 Solid Roller
Reply With Quote
Bookmarks