- Navigation
Results 1 to 4 of 4
Thread: my truck is stuck in 3rd gear
-
02-02-2012, 09:06 PM #1
my truck is stuck in 3rd gear
I have a 97 z71 with the 4l60 and the truck is stuck in 3rd gear I've replaced both shift soleniods and its still doing it. Any help out there ?
ThanksDustin Dillow-Tuned by Dillow's Tuning Solutions
95 Firebird Formula Cam, Bolt Ons, QP 9 Inch 3.50 Gear, Full UMI Rear Suspension, 3700lbs
7.86 at 86.20 mph 1.67 60ft, 7.16 at 99 mph 1.51 60 ft on .063 jet NX Shark Nozzle Single Fogger
-
02-02-2012, 10:08 PM #2"Project Storm Trooper"
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Tony
- Vehicle
- 93 StormTrooper Z28
- Location
- Rapid City, SD
- Posts
- 4,810

sounds like "Limp" mode, have you scanned for codes?
Official Member of $30k Club - Work in progress1993 Z28- 24x EFI, Clayton Racing 383ci, F1a w/FMIC, AFR 210's, LE Custom cam, LE LT4 Intake/heads, 80# injectors, 255lph/340lph pumps, T56 Conversion, 9" 4.11 w/spool, LPP LT w/Borla, Full UMI suspension....
1987 Iroc-Z - Stock Summer DD
-
02-03-2012, 09:52 AM #3
It's throws the codes for both shifting solenoids but I've replaced them both
Dustin Dillow-Tuned by Dillow's Tuning Solutions
95 Firebird Formula Cam, Bolt Ons, QP 9 Inch 3.50 Gear, Full UMI Rear Suspension, 3700lbs
7.86 at 86.20 mph 1.67 60ft, 7.16 at 99 mph 1.51 60 ft on .063 jet NX Shark Nozzle Single Fogger
-
02-03-2012, 01:35 PM #4
I agree. Sounds like limp mode. Check all your fuses. When there is no power to the tranny it will stay in 3rd gear. Also check the connector to the transmission for corrosion. I have heard that its a common problem with the connectors becoming corroded. As well as damaged terminal connections from vibration and stress. Good Luck.
95 Impala SS Clone
Reply With Quote

Bookmarks