Hit the ground running

[DMBlack]

Harness and ECM dropped off this morning.

[2tone_terror]

Looks like a fun project!
That Lt1 posted looks to be from a 95+ non 9C1 caprice? lack of blue silicone hoses and the vent for the optispark on the air intake leads me to believe so, going to swap out for aluminum fbody heads or better?

[JCzNova]

Harness and ECM dropped off this morning.

Will email you the VIN ASAP. Still haven't figured out the rear gears yet. Left the car at work so I will check tomorrow after the gym.

[JCzNova]

Looks like a fun project!
That Lt1 posted looks to be from a 95+ non 9C1 caprice? lack of blue silicone hoses and the vent for the optispark on the air intake leads me to believe so, going to swap out for aluminum fbody heads or better?

Close. '95 Roadmaster. Needs to be cleaned up, it is hooked to the cherry picker right now and will be out tomorrow. 4 crossmember bolts left! It will get some heads and probably a cam this spring. Just need to get it going down the road first so that I can register for the shootout.

[JCzNova]

Harness and ECM dropped off this morning.

Oh yeah, the motor mounts, throttle linkage, block off plates and delet pulley got here today.

[JCzNova]

Finally started the swap thread, just waiting for it to be moderator approved. Should be this link though.

http://ltxtech.com/forums/showthread.php?t=17655

[DMBlack]

The harness is ready and boxed up. Get me over the gear ratio and tire size so I can finish up the tune. We should be able to have everything back to you next week.

[Badhawk]

Nice project, I love Nova's and hope to see it at the shootout.