- Navigation
Results 1 to 5 of 5
Thread: Machine Shop
-
05-12-2011, 10:14 AM #1
InActive Member
- Status
- Offline
- Join Date
- May 2011
- Location
- Nebraska
- Posts
- 38
Machine Shop
Okay looking for a machine shop halfway close to Nebraska. Any one know of a good one? The "local" machine shop i have always used just changed hands and is not producing the qualitiy of work that they did, so I will not be using them any more. Please i would like to have someone familar to the ltx block to be doing the work. Thanks.
-
05-13-2011, 04:02 AM #2
10 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
The guy who did mine did a great job and he's familiar with LT's but he's here in KC so not to "local".
-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
-
05-13-2011, 08:19 AM #3
InActive Member
- Status
- Offline
- Join Date
- Jan 2010
- Location
- Southern NJ
- Posts
- 1,111
If you're interested in shipping it, there are a ton of LT1-fluent machine shops in the Atlantic region.
-Joe-
95 T/A.
Advanced Induction 383 - 10.81 @ 124.16, 1.43 60' Video of 10-second pass - 455whp/445wtq
-
05-14-2011, 06:59 AM #4
InActive Member
- Status
- Offline
- Join Date
- May 2011
- Location
- Nebraska
- Posts
- 38
Might have to ship. And KC is less than 8 hours, and the wife and I have friends down there. thanks for your info.
--Eric--
1996 Z28 M6--Vikki
-
05-14-2011, 11:54 PM #5
InActive Member
- Status
- Offline
- Join Date
- Feb 2009
- Location
- The Cowboy State
- Posts
- 1,259
Originally Posted by schrinere
What part of NE? I use a good shop in Greeley, CO.
-94 Z28 355 M6 24X E-85 21* TRICKFLOWS TH400 S60
C5 Z06 IN ROAD RACE TRIM. COMING SOON
Reply With Quote
Bookmarks