- Navigation
Results 1 to 4 of 4
Thread: VATS Question
-
04-06-2011, 07:41 PM #1
InActive Member
- Status
- Offline
- Join Date
- Dec 2010
- Posts
- 4
VATS Question
I am thinkin of doin a v6 to v8 swap and was wonderin about the VATS situation. The v6 is a 97 and the motor and computer i am going to use is out of a 96. I want to use the original key for the v6 car, so my question is will i have to get the V tuned out. Any other useful info about the swap would be greatly appreciated.
-
04-07-2011, 11:44 AM #2
InActive Member
- Status
- Offline
- Join Date
- Sep 2009
- Location
- Myrtle Beach SC
- Posts
- 1,776
Vats is a part of your BCM, to my knowledge you do not need to swap those out so you should be fine.
-
04-08-2011, 12:54 AM #3
InActive Member
- Status
- Offline
- Join Date
- Dec 2010
- Posts
- 226
worst comes to worst you can buy a blank of that key with the proper resistance chip in it and get it ground to they key that you need or delete vats with at resistor, done
-
04-08-2011, 07:01 AM #4
InActive Member
- Status
- Offline
- Join Date
- Dec 2010
- Posts
- 4
thank you for your replies. . . what i needed to know
Reply With Quote
Bookmarks