- Navigation
Results 1 to 4 of 4
Thread: Rocker arm help
-
04-03-2011, 08:41 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jan 2011
- Posts
- 14
Rocker arm help
hi there would these fit in my 97 camaro http://cgi.ebay.com/ebaymotors/COMP-...item35a8233b27 any help would be greatly appreciated thanks.
-
04-04-2011, 02:26 PM #2
InActive Member
- Status
- Offline
- Join Date
- Apr 2011
- Location
- Montpelier, IN
- Posts
- 15
Assuming that you have 7/16 studs to put them on, yes they will fit.
-Adam-
95 Z28 • A4 • CC503 • AI heads & intake • you get the idea...
-
04-04-2011, 04:48 PM #3
InActive Member
- Status
- Offline
- Join Date
- Feb 2011
- Location
- lake jackson, tx
- Posts
- 131
are they SA or NSA. if theyre NSA then you will need hardened pushrods and guide plates also.....SA will have two little tabs on the roller to allign it to the valve stem. and yes the 7/16 studs to boot.
Parts gathering for the turbo build has commenced!!! 
junk i have - 76mm turbo, 60# msd injectors, block, heads, intake, tb, tunercats, 1 ajax 2 bar factory pcm tune, moates apu1!
junk i need - camshaft, rods, +30 turbo pistons
-
04-04-2011, 08:54 PM #4
InActive Member
- Status
- Offline
- Join Date
- Jan 2011
- Posts
- 14
yea i have 7/16 studs and there nsa cool thanks guys
Reply With Quote
Bookmarks