- Navigation
Results 11 to 17 of 17
-
03-23-2011, 10:41 PM #11
Lurker
- Status
- Offline
- Join Date
- Oct 2009
- Location
- El Paso, TX
- Posts
- 665
The ebay stainless headers dont fit the vette, and they come with duals from the factory. Hookers are about the cheapest for these cars. TPiS are nice, and Melrose fit perfect, and are jet hot coated inside and out but are pricey
1992 Corvette A4: Long Tubes, duals with circle track mufflers, cut lid, 17x9.5/17x11 deep dish ZR1's on 275 Nitto 555 front, 315 Nitto 555 rears, Performabuilt level 2 700R4 w/ FTI 3200 Stall, PCM For Less tune, C5 Brake Swap, more to come....
-
03-24-2011, 05:21 PM #12
VIP Member
- Status
- Offline
- Join Date
- Dec 2009
- Posts
- 166
Yeah I was planing on hookers and I'm going to wrap mine so I don't care if they are shiny I'm still having a hard time swallowing 600 bucks for an opti thow
Turtle Racing because some times the Turtle catches the
-
03-24-2011, 07:30 PM #13
"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Everything he said..... even with my DYNASPARK dilemas right now, the customer service alone has made up for the issues.....
Originally Posted by ItSSlowZ28
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
03-24-2011, 08:48 PM #14
InActive Member
- Status
- Offline
- Join Date
- Feb 2011
- Location
- lake jackson, tx
- Posts
- 131
sorry....must have missed that you own a c4.....
Parts gathering for the turbo build has commenced!!! 
junk i have - 76mm turbo, 60# msd injectors, block, heads, intake, tb, tunercats, 1 ajax 2 bar factory pcm tune, moates apu1!
junk i need - camshaft, rods, +30 turbo pistons
-
03-26-2011, 11:26 AM #15
VIP Member
- Status
- Offline
- Join Date
- Dec 2009
- Posts
- 166
no its cool man he is claiming the car has the capabilty to go for 12's but i dot see it its not that much faster than my old vette even from a roll. Im just down to waiting on my tax return had to wait for the wifes w2 to get here lol then if all gose well i will have a 1000 bucks to put in it . First the igniton, new plugs and wire and a coil i already have a msd cap and rotor coming (thoght it as a whole opti i should read beter on ebay). Next i figuer some longtubes found a guy that order a set for his 92 vette got sent a set for a 91 got it put on and relized it when he needed to add an 02 bung, and becaus it only cost 165 bucks for a set im going to see if they will work figuer order them get a good lt1 exhaust gasket line the gasket up with the longtubes if the everything lines up i will try to install them add some high flow cats an x-pipe and some cherry bomb mufflers and get the rest of my n2o safty stuff
-
05-20-2011, 02:15 AM #16
VIP Member
- Status
- Offline
- Join Date
- Dec 2009
- Posts
- 166
All right I now I have a x-pipe msd box coil and cap and rotor and tomorrow I'm puting in new plugs and wires the msd stuff has made it run smother already can't wait to get the new plugs and wires in next buy is longtubes
-
05-20-2011, 06:00 PM #17
Lurker
- Status
- Offline
- Join Date
- Feb 2011
- Posts
- 113
cheap stuff? what do you have for your intake set up...free mods?
Reply With Quote
Bookmarks