- Navigation
Results 1 to 3 of 3
Thread: 383 build
-
02-07-2011, 01:31 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jan 2011
- Vehicle
- 1995 Camaro Z28
- Location
- Concord, NC
- Posts
- 185
383 build
This is a bit off, but I want to know what rotating assembly I should use. I looked at Lunati and its not to expensive... (2100ish) Any ideas?
Chris
1995 Camaro Z28 M6
Tuned by PCMForLess, Tick Shift T56 rebuild, Zeus Performance
-
02-07-2011, 02:25 PM #2
VIP Member
- Status
- Offline
- Join Date
- Jan 2009
- Name
- Paul Edwards
- Vehicle
- 1993 Camaro Z28
- Location
- Port Charlotte FL
- Posts
- 2,666
http://www.ohiocrank.com/home.html check out that place.
1995 Formula 383/t56 gone
1993 Camaro Z28, forged, TFS heads, solid roller, prosystems carbed, t56 swapped spec 3+
"Nitrous is like Tara Reid with an STD. You want to hit it, but your afraid of the consequences"
-
02-07-2011, 04:29 PM #3
InActive Member
- Status
- Offline
- Join Date
- Jan 2010
- Location
- Southern NJ
- Posts
- 1,111
Depends on what you're power goals are. I have an Ohio crank, Scat forged i-beams, and SRP -5cc pistons and am supporting ~575HP/7k RPMs easily.
-Joe-
95 T/A.
Advanced Induction 383 - 10.81 @ 124.16, 1.43 60' Video of 10-second pass - 455whp/445wtq
Reply With Quote
Bookmarks